Eizo Computer Monitor L375 User Manual

Users Manual  
Color LCD Monitor  
 
English  
TABLE OF CONTENTS  
PRECAUTIONS......................................................................................4  
1. INTRODUCTION .....................................................................................9  
1-1. Features ........................................................................................................9  
1-2. Package Contents..........................................................................................9  
1-3. Controls & Connectors ..............................................................................10  
2. CABLE CONNECTION .........................................................................12  
2-1. Before connecting .......................................................................................12  
2-2. Connecting the signal cable ........................................................................13  
2-3. Connecting two PCs to the monitor............................................................15  
3. ScreenManager....................................................................................17  
3-1. How to use the ScreenManager ..................................................................17  
3-2. ScreenManager Adjustments and Settings...................................................18  
3-3. Useful Functions .........................................................................................19  
4. ADJUSTMENT ......................................................................................21  
4-1. Screen Adjustment ......................................................................................21  
4-2. Displaying a low resolutions.......................................................................26  
4-3. Color Adjustment .......................................................................................28  
4-4. Power-save Setup ........................................................................................30  
5. MAKING USE OF USB (Universal Serial Bus)...................................32  
6. ATTACHING AN ARM STAND ..............................................................34  
7.TROUBLESHOOTING...........................................................................36  
8. CLEANING............................................................................................40  
9. SPECIFICATIONS.................................................................................41  
10. GLOSSARY.........................................................................................44  
APPENDIX/ANHANG/ANNEXE ..................................................................i  
TABLE OF CONTENTS  
3
 
English  
PRECAUTIONS  
IMPORTANT!  
This product has been adjusted specifically for use in the region to which it was  
originally shipped. If operated outside the region to which it was originally shipped,  
the product may not perform as stated in the specifications.  
To ensure personal safety and proper maintenance, please read this section and the  
caution statements on the unit (refer to the figure below).  
[Location of the Caution Statements]  
WARNING  
If the unit begins to emit smoke, smells like something is burning, or  
makes strange noises, disconnect all power connections immediately  
and contact your dealer for advice.  
Attempting to use a malfunctioning unit can be dangerous.  
Do not dismantle the cabinet or modify the unit.  
Dismantling the cabinet or modifying the unit may result in electric shock or  
burn.  
Refer all servicing to qualified service personnel.  
Do not attempt to service this product yourself as opening or removing covers  
may expose you to dangerous voltage or other hazards.  
4
PRECAUTIONS  
 
English  
WARNING  
Keep small objects or liquids away from the unit.  
Small objects accidentally falling through the ventilation slots into the cabinet  
or spillage into the cabinet may result in fire, electric shock, or equipment  
damage.  
If an object or liquid falls/spills into the cabinet, unplug the unit immediately.  
Have the unit checked by a qualified service engineer before using it again.  
Place the unit on a strong, stable surface.  
A unit placed on an inadequate surface may fall, resulting in injury or  
equipment damage.  
When the unit is dropped, please ask your dealer for advice. Do not continue  
using a damaged unit. Using a damaged unit may result in fire or electric  
shock.  
OK  
Set the unit in an appropriate location.  
Not doing so may cause damage and could result in fire or electric shock.  
* Do not place in outdoors.  
* Do not place in the transportation system (ship, aircraft, trains, automobiles,  
etc.)  
* Do not install in a dusty or humid environment.  
* Do not place in a location where the steam comes directly on the screen.  
* Do not place near heat generating devices or a humidifier.  
To avoid danger of suffocation, keep the plastic packing bags away  
from babies and children.  
Use the enclosed power cord and connect to the standard power outlet  
of your country. Be sure to remain within the rated voltage of the  
power cord.  
Not doing so may cause in fire or electric shock.  
To disconnect the power cord, grasp the plug firmly and pull.  
Never tug on the cord, doing so may cause damage and could result in fire or  
electric shock.  
OK  
PRECAUTIONS  
 
5
English  
WARNING  
The equipment must be connected to a grounded main outlet.  
Not doing so may cause in fire or electric shock.  
Use the correct voltage.  
* Do not overload your power circuit, as this may result in fire or electric  
shock.  
* The unit is designed for use with a specific voltage only. Connection to  
another voltage than specified in this User’s Manual may cause fire, electric  
shock, or other damage.  
* Do not overload your power circuit, as this may result in fire or electric  
shock.  
Handle the power cord with care.  
* Do not place the cord underneath the unit or other heavy objects.  
* Do not pull on or tie the cord.  
If the power cord becomes damaged, stop using it. Use of a damaged cord  
may result in fire or electric shock.  
Never touch the plug and power cord if it begins to thunder.  
Touching them may result in electric shock.  
When attaching an arm stand, please refer to the user’s manual of the  
arm stand and install the unit securely with the enclosed screws.  
Not doing so may cause the unit to come unattached, which may result in  
injury or equipment damage. When the unit is dropped, please ask your dealer  
for advice. Do not continue using a damaged unit. Using a damaged unit may  
result in fire or electric shock. When reattaching the tilt stand, please use the  
same screws and tighten them securely.  
Do not touch a damaged LCD panel directly with bare hands.  
The liquid crystal which leaks from the panel is poisonous if it enters the eyes  
or mouth.  
If any part of the skin or body comes in direct contact with the panel, please  
wash thoroughly. If some physical symptoms result, please consult your  
doctor.  
Follow local regulation or laws for safe disposal.  
The backlight of the LCD panel contains mercury.  
6
PRECAUTIONS  
 
English  
CAUTION  
Handle with care when carrying the unit.  
Disconnect the power cord and cables when moving the unit. Moving the unit  
with the cord attached is dangerous. It may result in injury or equipment  
damage.  
When handling the unit, grip the bottom of the unit firmly with both  
hands ensuring the panel faces outward before lifting.  
Dropping the unit may result in injury or equipment damage.  
OK  
Do not block the ventilation slots on the cabinet.  
* Do not place books or any other papers on the ventilation slots.  
* Do not install the unit in a closed space.  
* Do not use the unit lying down or upside down.  
Using the unit in these ways blocks the ventilation slots and prevents proper  
airflow, leading to fire or other damage.  
Do not touch the plug with wet hands.  
Touching them may result in electric shock.  
Use an easily accessible power outlet.  
This will ensure that you can disconnect the power quickly in case of a  
problem.  
Periodically clean the area around the plug.  
Buildup of dust, water, or oil on the plug may result in fire.  
Unplug the unit before cleaning it.  
Cleaning the unit while it is plugged into a power outlet may result in electric  
shock.  
If you plan to leave the unit unused for an extended period, disconnect  
the power cord from the wall socket after turning off the power switch  
for the safety and the power conservation.  
PRECAUTIONS  
 
7
English  
LCD Panel  
The screen may have defective pixels. These pixels may appear as slightly light  
or dark area on the screen. This is due to the characteristics of the panel itself,  
and not the product.  
The backlight of the LCD panel has a fixed life span. When the screen becomes  
dark or begins to flicker, please contact your dealer.  
Do not press on the panel or edge of the frame strongly, as this will result in  
damage to the screen. There will be prints left on the screen if the pressed  
image is dark or black. If pressure is repeatedly applied to the screen, it may  
deteriorate or damage your LCD panel. Leave the screen white to decrease the  
prints.  
Do not scratch or press on the panel with any sharp objects, such as a pencil or  
pen as this may result in damage to the panel. Do not attempt to brush with  
tissues as this may scratch the LCD panel.  
8
PRECAUTIONS  
 
English  
1. INTRODUCTION  
Thank you very much for choosing an EIZO Color Monitor.  
1-1. Features  
Dual inputs compliant  
DVI (p. 44) Digital input (TMDS (p. 45)) compliant  
Horizontal scanning frequency: 31 - 61 kHz (Digital input: 31 - 49 kHz)  
Vertical scanning frequency: 50 - 85 Hz Vertical (1024 x 768 ~ 75 Hz)  
Vertical (Digital) of 60 Hz (VGA text: 70 Hz)  
Resolution: 1024 x 768  
Smoothing function incorporated for the adjustment of an enlarged image. (p.26)  
Auto Adjustment compliant and original “Picture Adjustment Program” software  
included.  
ColorManagement function incorporated (p.28)  
Support to sRGB (p.45) standard  
USB (Universal Serial Bus) hub supported. (p.32)  
Ultra slim bezel incorporated  
1-2. Package Contents  
Please contact your local dealer for assistance if any of the listed items are missing or  
damaged.  
LCD Monitor  
Power Cord  
Signal Cable (FD-C16)  
Signal Cable (FD-C04)  
4 of M4 x 12 mm mounting screws  
EIZO LCD Utility Disk  
User’s Manual  
ScreenManager Quick Reference  
LIMITED WARRANTY  
NOTE  
Please retain the packing materials for future transference.  
1. INTRODUCTION  
 
9
English  
1-3. Controls & Connectors  
Front  
(2)  
(1)  
Control Panel  
SIGNAL  
1 - 2  
AUTO  
ENTER  
(3)  
(5)  
(7)  
(8)  
(4)  
(6)  
(1) ScreenManager  
(2) Main Power Switch  
(3) Input signal selection button  
(4) Auto Adjustment Button  
(5) Enter Button  
(6) Control Buttons  
(7) Power Button  
(8) Power Indicator*1  
Green  
Yellow  
Operation  
Power saving  
Flashing yellow  
(2 times for  
each)  
Power save mode Digital only  
Flashing yellow  
slowly  
Power is off (Main power is on)  
*1 Regarding the power indicator for the “Off Timer”, see page 19.  
10 1. INTRODUCTION  
 
English  
Rear  
(11)  
(10)  
(9)  
Bottom  
(12) (13)(14) (15)  
(9) Stand with cable holder (Detachable)*2  
(10) Power Terminal Covers for the Optional peripheral  
(11) Security Lock Slot*3  
(12) DVI-I Input Connector x 2 (SIGNAL 1, SIGNAL 2)  
(13) USB Port (2 Downstream)  
(14) USB Port (1 Upstream)  
(15) Power Connector  
*2  
The LCD monitor can be used with an optional arm stand by removing the stand.  
(see page 34)  
*3  
Allows for connection of a security cable. This lock supports Kensington’s  
MicroSaver security system. For further information, please consult :  
Kensington Technology Group  
2855 Campus Drive, San Mateo, CA 94403 USA  
Tel.: 800-650-4242, x3348, Intl: 650-572-2700, x3348  
Fax: 650-572-9675  
1. INTRODUCTION 11  
 
English  
2. CABLE CONNECTION  
2-1. Before connecting  
Before connecting your monitor to the PC, change the display screen settings (resolution  
p. 45) and frequency) in accordance with the charts below.  
NOTE  
When your computer and display support VESA DDC, the suitable resolution and  
the refresh rate are set by just plugging your display into the computer without any  
manual settings.  
Analog Input  
Resolution  
640 × 480  
720 × 400  
800 × 600  
832 × 624  
1024 × 768  
Frequency  
~ 85 Hz  
70 Hz  
Remarks  
VGA, VESA  
VGA TEXT  
VESA  
~ 85 Hz  
75 Hz  
Apple Macintosh  
VESA  
~ 75 Hz  
Digital Input  
Only the following resolutions with frequency can be displayed on this model.  
Resolution  
640 × 480  
720 × 400  
800 × 600  
1024 × 768  
Frequency  
60 Hz  
Remarks  
VGA  
70 Hz  
VGA TEXT  
VESA  
60 Hz  
60 Hz  
VESA  
12 2. CABLE CONNECTION  
 
English  
2-2. Connecting the signal cable  
NOTE  
Be sure that the power switches of both the PC and the monitor are OFF.  
1. Plug the signal cable into the connector at the rear of the monitor  
and the other end of the cable into the video connector on the PC.  
After connecting, secure the connection with the screw-in fasteners.  
Power Cord  
Analog Input  
Signal Cable  
Connector  
Video Output  
Connector D-Sub mini  
15 pin  
PC  
Signal Cable (FD-C16  
enclosed)  
Standard graphics card  
Macintosh G3 (Blue &  
White) / G4  
Signal Cable (FD-C16  
enclosed) + Macintosh  
Adapter (Optional)  
Video Output  
Connector D-Sub 15  
pin  
Macintosh  
Macintosh Adapter (Optional)  
Digital Input  
Signal Cable  
Connector  
PC  
Signal Cable (FD-C04  
enclosed)  
Video Output  
Connector DVI-I  
Digital graphics board  
NOTE  
The monitor is not compatible with a Power Macintosh G4/G4 Cube ADC  
(Apple Display Connector)  
2. Plug the power cord into the power connector on the rear of the  
monitor.  
2. CABLE CONNECTION 13  
 
English  
3. Lead the power cord and signal cable into the cable holder at rear of  
the monitor.  
Cable Holder  
4. Plug the other end of the power cord into a power outlet.  
WARNING  
Use the enclosed power cord and connect to the standard  
power outlet of your country.  
Be sure to remain within the rated voltage of the power cord.  
Not doing so may cause in fire or electric shock.  
The equipment must be connected to a grounded main  
outlet.  
Not doing so may cause in fire or electric shock. Not doing so  
may cause in fire or electric shock.  
5. Turn on the monitor's main power and then switch on the PC's  
power.  
The monitor’s power indicator will light up (green).  
If an image does not appear, refer to the “TROUBLE SHOOTING” (p.36) for  
advice.  
Whenever finished, turn off the PC and the monitor.  
NOTE  
When turning on the monitor, the kind of the input signal (Signal1 or 2/Analog or  
Digital) is displayed for a few seconds on the right top corner of the screen.  
Adjust brightness of the screen depending on the brightness of your environment.  
Be sure to take adequate rests. A 10-minute rest period each hour is suggested.  
14 2. CABLE CONNECTION  
 
English  
2-3. Connecting two PCs to the monitor  
Two PCs can be connected to the monitor through the Signal 1 and the Signal 2 on the  
back of the monitor.  
Connecting Examples  
Signal 1  
Signal 2  
PC 1  
PC 2  
(Ex.1) Analog D-Sub  
Signal Cable  
Signal Cable  
DVI  
Digital  
mini 15  
pin  
(FD-C16 enclosed)  
(FD-C04 enclosed)  
(Ex.2) Analog D-Sub  
Signal Cable  
Signal Cable  
D-Sub Analog  
mini  
15 pin  
mini 15  
pin  
(FD-C16 enclosed)  
(FD-C16 optional)  
(Ex.3) Digital DVI  
Signal Cable  
Signal Cable  
DVI  
Digital  
(FD-C04 enclosed)  
(FD-C04 optional)  
2. CABLE CONNECTION 15  
 
English  
Selecting the active input  
The Input signal selection button on the front panel can be used to select either Signal 1  
or Signal 2 as the active input at any time. Every time the button is pressed, the input  
changes. When switching the signal, the kind of the input signal (Signal1 or 2/Analog or  
Digital) is displayed for a few seconds on the right top corner of the screen.  
Input signal selection button  
SIGNAL  
1 - 2  
AUTO  
ENTER  
The priority input signal  
This function is used to select which PC will have priority to control the monitor when  
utilizing two PCs. The monitor constantly checks the input signals and switches  
automatically in accordance with the “Input Priority” setting (see table below). Once a  
priority is set, whenever a change of signal is detected at the selected input, the monitor  
will switch the input to that signal.  
In the case of only one signal being present at either input, the monitor automatically  
detects and displays that signal.  
Priority  
setting  
Performance  
If signals from both inputs are present, the monitor gives preference to  
Signal 1 in the following cases.  
Signal 1  
When the power of the monitor is turned ON  
When the signal input to Signal 1 is changed even if active input was Signal  
2.  
If signals from both inputs are present, the monitor gives preference to  
Signal 2 in the following cases.  
Signal 2  
Manual  
When the power of the monitor is turned ON  
When the signal input to Signal 2 is changed even if active input was Signal  
1.  
The monitor will not detect signals automatically in this mode. Select the  
active input by pressing the input signal selection button on the monitor’s  
front panel.  
NOTE  
When the Signal 1 or Signal 2 is selected, the power saving mode of the monitor  
activates only if both PCs are in power saving mode.  
16 2. CABLE CONNECTION  
 
English  
3. ScreenManager  
3-1. How to use the ScreenManager  
Control Buttons  
Left, Down, Up, Right  
SIGNAL  
1 - 2  
AUTO  
ENTER  
Auto Adjustment button  
Enter button  
1. Entering the ScreenManager  
Push the Enter button once to display the main menu of the ScreenManager.  
[ Main Menu ]  
2. Making Adjustments and Settings  
(1) Select the desired sub menu icon using the Control buttons and push the Enter  
button. The sub menu appears.  
(2) Use the Control buttons to select the desired setting icon and push the Enter  
button. The setting menu appears.  
(3) Use the Control buttons to make all required adjustments and push the Enter  
button to save the settings.  
3. Exiting the ScreenManager  
(1) To return to the main menu, select the <Return> icon or push the down button  
twice, followed by the Enter button.  
(2) To exit the ScreenManageru, select the <Exit> icon or push the down button  
twice, followed by the Enter button.  
NOTE  
Double clicking the Enter button at any time also exits the ScreenManager menu.  
3. ScreenManager 17  
 
English  
3-2. ScreenManager Adjustments and Settings.  
The following table shows all the ScreenManager’s adjustment and setting menus.  
“*” indicates adjustments of analog input only and “**” indicates digital input only.  
Main menu  
Sub menu  
Reference  
*
*
Screen  
Clock  
4-1. Screen Adjustment (p.21)  
Phase  
Position  
Resolution  
Smoothing  
Contrast/Brightness  
Signal Filter  
*
*
ColorManagement  
Range Adjustment  
Color Mode  
4-3. Color Adjustment (p.28)  
Standard  
Mode  
Temperature  
Custom  
Mode  
Temperature  
Saturation  
Hue  
Gain  
Reset  
sRGB  
**  
*
PowerManager  
Others  
DVI DMPM  
VESA DPMS  
EIZO MPMS  
Screen Size  
4-4. Power-save Setup(p.30)  
*
4-2. Displaying a low resolutions (p.26)  
Select the priority input signal. (p.16)  
Border Intensity  
Input Priority  
Off Timer  
Set the monitor’s off timer to on or off.  
(p.19)  
Beep  
Set the monitor’s beeper to on or off.  
(p.42)  
Menu  
Settings  
Menu Size  
Change the size of the menu.  
Adjust the menu position  
Menu Position  
Menu Off Timer  
Translucent  
Set the menu displaying time.  
Set the transparency of the background.  
Reset  
Return to the factory default settings.  
(p.42)  
Information  
Language  
Information  
Review the ScreenManager’s settings,  
model name, serial number and usage  
time*1.  
English, German, French,  
Spanish, Italian, Swedish and  
Japanese  
Select the ScreenManager’s language.  
*1Due to the inspection on the factory, the usage time may not “0 hour” at shipping.  
18 3. ScreenManager  
 
English  
3-3. Useful Functions  
Adjustment Lock  
Use the “Adjustment Lock” function to prevent any accidental changes.  
Locked function  
Auto adjustment button adjustments and settings in the  
ScreenManager.  
Auto Adjustment Button  
Unlocked function  
Adjustment of contrast and brightness by the control buttons.  
Input signal selection button  
To lock  
Switch off the monitor’s power by the power button on the front panel. Press on the  
Auto adjustment button while switching on the monitor’s power.  
To unlock  
Switch off the monitor’s power by the power button on the front panel, then hold  
down the Auto adjustment button once again and turn the power back on.  
Off Timer  
The off timer function causes the monitor to automatically enter a power off state after  
a predetermined amount of time has lapsed. This function was created to reduce  
afterimage (p.44) characteristics that are particular to LCD monitors when the monitor  
screen is left on for a long period without use.  
[Procedure]  
(1) Select <Off Timer> in the ScreenManager “Others” menu.  
(2) Select “Enable” and press the right and left buttons to adjust the “On Period” (1 to  
23 hours).  
[Off timer system]  
PC  
Monitor  
LED  
On Period (1H - 23H)  
Last 15 min. in "On period"  
"On period" expired  
Operation  
Green  
Advance Notice *1  
Green Flashing  
Power off  
Flashing yellow slowly  
*1Advance notice (LED flashing green) will be given 15 minutes before the monitor automatically  
enters the “Power Off” mode. To delay entering the “Power Off” mode, press the power button  
during the advance notice period. The monitor will continue to operate for an additional 90  
minutes.  
[Procedure]  
Press the power button to return to a normal screen.  
NOTE  
The off timer function works while the PowerManager is active, but there is no  
advance notice before the monitor’s power is switched off.  
3. ScreenManager 19  
 
English  
EIZO Logo appearing function  
When switching on the power button on the front panel, the EIZO logo is displyed for a  
while. If you desire to display or undisplay this logo, use this function. (Default is logo  
appearing.)  
To undisplay  
Switch off the monitor’s power by the power switch on the front panel, then hold  
down the Enter button once again and turn the power back on.  
To display again  
Switch off the monitor’s power by the power switch, then hold down the Enter  
button once again and turn the power back on.  
20 3. ScreenManager  
 
English  
4. ADJUSTMENT  
4-1. Screen Adjustment  
NOTE  
Allow the LCD monitor to stabilize for at least 20 minutes before making image  
adjustments.  
When connecting the DVI-I cable for digital input, see page 25.  
Analog Input  
Screen adjustments for the LCD monitor should be used in suppressing screen flickering  
and also for adjusting the screen to its proper position. There is only one correct  
position for each display mode. It is also recommended to use the ScreenManager  
function when first installing the display or whenever changing the system. For  
convenience, an easy set-up Program installed on the utility disk to assist in the set-up  
procedure is provided.  
Adjustment Procedure  
1. Push the Auto adjustment button on the front panel.  
The message “Your setting will be lost, if you press again now.” appears and  
remains on the screen for 5 seconds. While the message is on the screen, push the  
Auto adjustment button again to automatically adjust the clock, phase, screen  
position and resolution. If you do not wish to do adjust the screen, do not push  
the Auto adjustment button again.  
If the appropriate screen can not be made by using the Auto adjustment  
button, adjust the screen through the following procedures. If the  
appropriate screen can be made, proceed to step 4.  
2. Install the “Screen adjustment program”  
Having read the “Readme.txt” file, install and run the “Screen adjustment  
program” in the enclosed EIZO LCD utility disk. Step by step adjustment is  
provided by the wizard guide.  
NOTE  
If the user’s operating system has no utility disk (e.g. OS/2), we recommend  
setting the desktop pattern to that as shown in the diagram on the following  
page.  
4. ADJUSTMENT 21  
 
English  
3. Adjust by using <Screen> menu in the ScreenManager.  
(1) Vertical bars appear on the screen  
Use the <Clock> (p.44) adjustment.  
Select the “Clock” and eliminate the vertical bars by using the right and left of  
the control buttons. Do not continuously press the control buttons, as the  
adjustment value will change quickly and make it difficult to locate the most  
suitable adjustment point.  
If the horizontal flickering, blur or bars appear, proceed to “Phase” adjustment  
as follows.  
NOTE  
When adjusting the <Clock>, the horizontal screen size will also change.  
(2) Horizontal flickering, blurring or bars appear on the screen.  
Use the <Phase> (p.44) adjustment.  
Select the <Phase> and eliminate the horizontal flickering, blurring or bars by  
using the right and left buttons.  
NOTE  
Horizontal bars may not completely disappear from the screen depending on  
the PC.  
22 4. ADJUSTMENT  
 
English  
(3) The screen position is not incorrect.  
Use the <Position> adjustment.  
The correct displayed position of the monitor is decided because the number  
and the position of the pixels are fixed. The <Position> adjustment moves the  
image to the correct position.  
Select <Position> and adjust the position of the upper left corner of the image  
by using the up, down, right and left buttons in order to align the screen.  
If vertical bars of distortion appear after finishing the <Position> adjustment,  
return to <Clock> adjustment and repeat the previously explained adjustment  
procedure (“Clock” “Phase” “Position”)  
(4) Screen image is smaller or larger than the actual screen images.  
Use the <Resolution> adjustment.  
Adjustment is needed when the input signal resolution and the resolution now  
being displayed are different.  
Select <Resolution> and confirm if the resolution now being displayed is the  
same as the input resolution. If it is not, adjust the vertical resolution using the  
up and down button and adjust the horizontal resolution using the right and  
left buttons.  
Smaller than the actual screen images.  
Adjusted to actual screen  
Larger than the actual screen images.  
4. ADJUSTMENT 23  
 
English  
4. Adjust the output signal range (Dynamic Range) of the signal.  
Use the <Range Adjustment> (p.45) of <ColorManagerment>  
menu.  
This controls the level of output signal range to display the whole color gradation  
(256 colors).  
[Procedure 1]  
Push the Auto adjustment button on the front panel while displaying the <Range  
Adjustment> menu to automatically adjust the range. The screen blanks for a  
moment, and adjusts the color range to display the whole color gradation of the  
current output signal.  
[Procedure 2]  
Pressing Auto adjustment button while displaying the contrast/brightness  
adjustment screen (appeared by pressing the control buttons directly) adjusts the  
range automatically. (Contrast and Brightness will not be adjusted.)  
5. Set the Contrast of the screen.  
Use the <Contrast> adjustment.  
This controls the brightness for the each color (red, blue and green) at the same  
time.  
Select <Contrast/Brightness> and adjust by using the right and left buttons.  
NOTE  
Percentage except 100 % may cause undisplayable color tone.  
During selecting the <sRGB> of <ColorManagement>, contrast cannot be  
adjusted.  
6. Set the Brightness of the screen.  
Use the <Brightness> adjustment.  
The brightness of the entire screen is controlled by changing the brightness of the  
backlight.  
Select <Contrast/Brightness> in the screen menu and adjust by using the up and  
down buttons.  
NOTE  
Directly pressing the control buttons also adjusts the contrast and brightness.  
Press the <Enter> button to save and exit the settings after the adjustment.  
24 4. ADJUSTMENT  
 
English  
Digital input  
The monitor displays the digital input image correctly based on its pre-setting data.  
However, if the image position is not correct or larger than the actual image screen,  
please adjust the following adjustment items using the “Screen” menu of the  
ScreenManager.  
1. The screen position is incorrect.  
Use the <Position> adjustment.  
See page 23.  
2. Screen image is smaller or larger than the actual screen images.  
Use the <Resolution> adjustment.  
See page 23.  
3. Set the Contrast of screen.  
Use the <Contrast> adjustment.  
See page 24.  
4. Set the Brightness of the screen.  
Use the <Brightness> adjustment.  
See page 24.  
4. ADJUSTMENT 25  
 
English  
4-2. Displaying a low resolutions  
The lower resolutions are enlarged to full screen automatically. Using the <Screen Size>  
function in the <Others> menu enables to change the screen size.  
1. Enlarge the screen size when displaying a low resolution.  
Select the <Screen Size>.  
Select the <Screen Size> in the others menu and select the screen size by using the  
up and down buttons.  
Menu  
Function  
Displays the picture on the screen in full, irrespective of the picture’s  
resolution. Since the vertical resolution and the horizontal resolution  
are enlarged at different rates, some images may appear distorted.  
Full  
Displays the picture on the screen in full, irrespective of the picture’s  
resolution. Since the vertical resolution and horizontal resolution are  
enlarged at same rates, some horizontal or vertical image may  
disappear.  
Enlarged  
Normal  
Displays the picture at the actual Screen resolution.  
Example: Displaying 720 x 400  
Normal  
Enlarged  
Full  
(720×400)  
(1024×768)  
(1024×569)  
2. Smooth the blurred texts of the enlarged screen.  
Switch the <Smoothing> setting.  
Select the suitable level from 1 – 5 (Soft – Sharp).  
Select <Smoothing> in the <Screen> menu and adjust by using the right and left  
buttons.  
NOTE  
<Smoothing> is disabled when the screen is displayed in the following  
resolutions.  
*1024 x 768  
26 4. ADJUSTMENT  
 
English  
3. Set the brightness of the black area surrounding the displayed image.  
Set the <Border Intensity>.  
In the <Enlarge> mode or <Full Screen> mode, the outer area (border) is usually  
black.  
Select <Border Intensity> in the <Others> menu and adjust by using the right and  
left buttons.  
Border  
4. ADJUSTMENT 27  
 
English  
4-3. Color Adjustment  
The <ColorManagement> menu in the ScreenManager enables to change the color of  
the screen. By using the <Color Mode>, the adjustment mode can be selected from  
<Custom mode> (to adjust the color settings according to your preference) and <sRGB>  
mode.  
In the analog input, perform the “Range Adjustment” (p.24) before making the  
color adjustments.  
NOTE  
Allow the LCD monitor to stabilize for at least 20 minutes before making image  
adjustments. (Allow the monitor to warm up for at least 20 minutes before making  
adjustments.)  
Performing the <Reset> of the <ColorManagement> menu returns the color settings  
to the default settings. (Except <Range Adjustment> settings).  
The values shown in percentages represent the current level within the specific  
adjustment. They are available only as a reference tool. (To create a uniform white  
or black screen, the percentages for each will probably not be the same.)  
<Standard> mode:To set the color temperature  
To set the color temperature (p.45)  
Set the <Temperature>.  
The <Temperature> can be set from 4,000 K to 10,000 K, in 500 K increments  
(including 9,300 K). Default setting is off (normal white).  
NOTE  
The values shown in the Kelvin are available only as a reference tool.  
Setting the temperature under 4,000 K or over 10,000 K invalidates the color  
temperature setting. (The color temperature’s setting turns “OFF”.)  
<Custom> mode:To adjust the color settings according  
to your preference  
To change the saturation  
Use the <Saturation> adjustment.  
The <Saturation> can be selected from -16 ~ 16. Setting the minimum level (-16)  
turns the image to the monochrome.  
NOTE  
The <Saturation> adjustment may cause undisplayable color tone.  
28 4. ADJUSTMENT  
 
English  
To change the flesh color, etc.  
Use the <Hue> adjustment.  
The <Hue> can be selected from –20 to 20.  
NOTE  
The <Hue> adjustment may cause undisplayable color tone.  
To change each color (red, green and blue)  
Use the <Gain> (p.44) adjustment.  
By adjusting the red, green and blue color tones for each mode, custom colors can  
be defined. The 100 % indicates unadjusted condition. Display a white or gray  
background image and adjust the <Gain>.  
NOTE  
The values shown in the percentage are available only as a reference tool.  
Setting the <Temperature> (p.28) invalidates the <Gain> adjustment. <Gain>  
setting returns to the default: All the color indicates 100 %.  
To select <sRGB>  
Select <sRGB> from the <Color Mode>.  
During selecting the <sRGB>, color and contrast cannot be changed.  
4. ADJUSTMENT 29  
 
English  
4-4. Power-save Setup  
The <PowerManager> menu in the ScreenManager enables to set the power-save setup.  
NOTE  
Do your part to conserve energy, turn off the monitor when you are finished using it.  
Disconnecting the monitor from the power supply is recommended to save energy  
completely.  
Even if the monitor is in a power saving mode, USB compliant devices function  
when they are connected to the monitor’s USB (both the upstream and the  
downstream ports). Therefore, power consumption of the monitor will change  
according to the connected devices even if the monitor is in a power saving mode.  
Analog input  
This monitor complies with the <VESA DPMS> (p.45) standard and adopts a power  
saving method, <EIZO MPMS> (p.44), which works with a blank screen (totally black  
screen) like “Blank Screen” ScreenSaver software.  
To use the PC’s power saving system (VESA DPMS ).  
[Procedure]  
(1) Set the PC’s power saving settings.  
(2) Select “VESA DPMS” in the <PowerManager> menu.  
[Power saving system]  
PC  
Monitor  
LED  
Operation  
Operation  
Green  
STAND-BY  
SUSPEND  
Power saving  
Power saving  
Yellow  
OFF  
Operate the mouse or keyboard to return to a normal screen.  
30 4. ADJUSTMENT  
 
English  
To set the power save with ScreenSaver (EIZO MPMS) software.  
[Procedure]  
(1) Set the PC’s appropriate ScreenSaver settings or blank the screen (totally black  
screen).  
(2) Select <EIZO DPMS> in the <PowerManager> menu.  
[Power saving system]  
PC  
Monitor  
LED  
Operation  
Operation  
Green  
Blank the screen  
Power saving  
Yellow  
(ScreenSaver or Macintosh Energy  
Saver)  
Operate the mouse or keyboard to return to a normal screen.  
NOTE  
EIZO MPMS should be used with Macintosh “EnergySaver”.  
Digital input  
This monitor complies with the DVI DMPM (p.44).  
[Procedure]  
(1) Set the PC’s power saving settings.  
(2) Select “VESA DPMS” in the <PowerManager> menu.  
[Power saving system]  
PC  
On  
Monitor  
Operation  
LED  
Green  
Yellow  
Power saving  
Power saving  
Flashing yellow (2 times  
for each)  
Off mode  
Power saving*1  
*1Power saving through the PC’s off mode is only supported when “Manual”  
is selected on the ScreenManager’s <Input Priority>.  
[Procedure]  
Operate the mouse or keyboard to return to a normal screen.  
Power on the PC to return a normal screen from the Off mode of the PC.  
4. ADJUSTMENT 31  
 
English  
5. MAKING USE OF USB  
(Universal Serial Bus)  
This monitor provides a hub which supports the USB standard. When connecting to a  
USB compliant PC or another hub, the monitor functions as a hub to which the USB  
compliant peripherals can be easily connected.  
Required system environment  
PC equipped with USB ports or another USB hub connected to the USB compliant PC  
Windows 98/2000 // Mac OS 8.5.1 or later  
EIZO USB Cable (Optional)  
NOTE  
The USB hub function may not work properly depending on the PC, OS or  
peripherals. Please consult the manufacturer of each device about the USB  
support.  
When the monitor is not on, the peripherals connected to the downstream ports will  
not operate.  
Even if the monitor is in a power saving mode, the devices connected to the  
monitor’s USB ports (both the upstream and the downstream) will function.  
The followings are procedures for the Windows 98/Me/2000 and Mac OS.  
Connecting to the USB HUB  
1. Connect the monitor to the PC with the signal cable (See page 13)  
first, then turn on the PC.  
2. Connect the upstream port of the monitor to the downstream port of  
the USB compliant PC or another hub by using the USB cable.  
Upstream Ports  
Upstream port:  
Connect the USB compliant PC or  
another hub using the USB cable.  
To Downstream Ports of  
the PC or Another Hub  
32 5. MAKING USE OF USB (Universal Serial Bus)  
 
English  
After connecting the USB cable, the USB function can be set up automatically.  
3. After setting up, the monitor’s USB hub is available for connecting  
USB compliant peripherals to the downstream ports of the monitor.  
Connecting Examples  
Monitor  
PC  
Mouse  
Keyboard  
Printer  
Downstream  
Downstream ports:  
Connect the cables from USB  
compliant peripherals such as a  
mouse, keyboard, etc.  
Keyboard  
Printer  
5. MAKING USE OF USB (Universal Serial Bus) 33  
 
English  
6. ATTACHING AN ARM STAND  
The LCD monitor can be used with an arm stand by removing the tilt stand and  
attaching the arm stand to the LCD monitor.  
NOTE  
Use an arm stand that satisfies the followings.  
- When using the LCD monitor with an arm stand, the arm stand must be VESA  
approved:  
*Use an arm stand with a 75 mm x 75 mm hole spacing on the arm mounting  
pad.  
*Weight: Use an arm stand that is able to support an object weighting 8.0 kg  
(17.6 lbs.).  
- Use an arm stand with sufficient stability (mechanical firmness) to support the  
weight of the monitor.  
- Use an arm stand remaining that position where it is manually moved.  
- Use an arm stand with the ability to tilt the monitor forward and backward.  
Please connect cables after attaching an arm stand.  
Setup Procedure  
1. Hold the center of the stand mounting cover and slide them  
rightward or leftward to remove the mounting cover.  
Stand mounting cover  
2. Lay the LCD monitor down. Do not scratch the panel.  
3. Remove the tilt stand by loosening the screws. (4 pcs of M4 x 8  
Zn/Fe)  
34 6. ATTACHING AN ARM STAND  
 
English  
4. Attach an arm stand to the LCD monitor securely.  
Arm-stand  
M4 Mounting Screws: M4 x 12 (mm) Zn/Fe  
6. ATTACHING AN ARM STAND 35  
 
English  
7.TROUBLESHOOTING  
If a problem persists even after applying the suggested remedies, contact an EIZO dealer.  
No picture problems See No.1 ~ No.2  
Imaging problems See No.3 ~ No.13  
Other problems See No.14 ~ No.18  
USB problems See No.19 ~ No.20  
Problems  
Points to check with possible solutions  
Check that the power cord is correctly connected.  
If the problem persists, turn off the monitor power  
for a few minutes, then turn it back on and try  
again.  
1. No picture  
Indicator status: Off  
Check the “Contrast and Brightness” settings.  
Indicator status: Green  
Indicator status: Yellow  
Switch the signal input by pressing the input signal  
selection button on the front control panel.  
Try pressing a key on the keyboard, or clicking the  
mouse.  
(p.30)  
Indicator status: Slowly flashing  
Yellow  
Try pressing the power button.  
Try turning the PC on.  
Indicator status: Flashing Yellow  
(twice for each)  
This message appears when the signal is not inputted  
correctly, even if the monitor functions properly.  
2. Error messages shown below will  
remain on the screen for 40  
seconds.  
When the image is displayed correctly after a short  
time, there is no problem with the monitor. (Some  
PCs do not output the signal soon after powering  
on.)  
Check that the PC is turned ON.  
Check that the signal cable is properly connected to  
the PC or graphics board.  
Switch the signal input by pressing the input signal  
selection button on the front control panel.  
Use the graphics board’s utility software to change  
the frequency setting. (Refer to the manual of the  
graphics board.)  
Whenever an error signal message  
appears, the signal frequency will be  
displayed in red.  
(Example)  
36 7. TROUBLESHOOTING  
 
English  
Problems  
Points to check with possible solutions  
Adjust the image position using the <Position>  
(p.23) If the problem persists, use the graphics  
board’s utility software to change the display  
position if available.  
3. Display position is incorrect.  
Adjust the resolution using the <Resolution> (p.23)  
Decrease the vertical bars using the <Clock>. (p.22)  
4. Screen image is smaller or larger  
than the actual screen images.  
5. Vertical bars of distortion appear.  
Decrease the horizontal bars using the <Phase>.  
6. Horizontal bars of distortion appear.  
(p.22)  
Adjust the blurred lines using <Smoothing> (p.26)  
7. Letters and lines appear blurred.  
This happens when both composite (X-OR) input  
signal and separate vertical synchronizing signal  
are input. Please select one of the two.  
8. Distortion appears like the figure  
below.  
Adjust the <Contrast and Brightness> (The  
backlight of the LCD monitor has a fixed life span.  
When the screen becomes dark or begins to flicker,  
please contact your dealer.)  
9. The screen is too bright or too dark.  
10. Afterimages appear.  
When the screen image is changed after displaying  
the same image for a long period, an afterimage  
may appear. The “Afterimage” can be removed  
gradually by changing the displayed image. Use the  
“Off Timer” function and avoid keeping the screen  
on all the time. (p.19)  
7. TROUBLESHOOTING 37  
 
English  
Problems  
Points to check with possible solutions  
This is due to the characteristics of the panel itself,  
11. The screen has defective pixels (e.g.  
slightly light or dark).  
and not the LCD product.  
Leaving the screen white may solve the problem.  
12. Fingerprints remain on the screen.  
13. The noise appears on the screen.  
Change the mode in <Signal Filter> in the <Screen>  
menu.  
<Smoothing> is disabled when the screen is  
14. The <Smoothing> can not be  
selected.  
displayed in the 1024 x 768.  
Some PCs without PC-Exchange do not allow the  
utility disk to be opened. Please set the desktop  
pattern to every-other-dot before adjustment.  
(p.22)  
15. The utility disk is unable to be  
opened (for Macintosh only).  
The adjustment lock is probably on. To unlock:  
switch the LCD monitor off. Then, while pressing  
the Auto adjustment button, switch the power on.  
(p.19)  
16. The Enter button does not operate.  
The adjustment lock is probably on. To unlock:  
switch the LCD monitor off. Then, while pressing  
the Auto adjustment button, switch the power on.  
(p.19)  
17. The Auto adjustment button does not  
operate.  
The Auto sizing function is intended for use on the  
Macintosh and on AT-compatible PC running  
Windows. It may not work properly in either of the  
following cases.  
When running an AT-compatible PC on MS-DOS  
(Not windows). The background color for the  
“wall paper” or “desktop” pattern is set to black.  
Some signals from a graphics board may not  
function properly.  
Use the graphics board’s utility software to change  
18. Frequency does not change after  
installing “Monitor information file”  
in the attached utility disk on  
Windows 95/98/2000.  
the input signal frequency.  
38 7. TROUBLESHOOTING  
 
English  
Problems  
Points to check with possible solutions  
Check that the USB cable is correctly connected.  
19. USB function cannot be setup.  
Check that the PC and OS are USB compliant. (For  
verification of USB support, consult the  
manufacturer of each system.)  
Check the PC’s BIOS setting for USB. (For details,  
refer to the manual of the PC.)  
Check that the USB cable is correctly connected.  
20. PC is hung up. / The peripherals  
connected to the downstream ports  
do not operate.  
Check the downstream ports by connecting the  
peripherals to other downstream ports. If the  
problem is solved by doing this, contact an EIZO  
dealer. (For details, refer to the manual of the PC.)  
Try executing the following method.  
Restarting the PC - Restarting the PC  
Connecting the PC and peripherals directly  
If the problem is solved by doing this, contact an  
EIZO dealer.  
The power button of the APPLE keyboard does not  
operate if it is connected to the EIZO USB Hub.  
Please connect the keyboard directly with the PC.  
Refer to the instruction of the PC for details.  
7. TROUBLESHOOTING 39  
 
English  
8. CLEANING  
Periodic cleaning is recommended to keep the monitor looking new and to prolong its  
operation lifetime.  
NOTE  
Never use thinner, benzene, alcohol (ethanol, methanol, or isopropyl alcohol),  
abrasive cleaners, or other strong solvents, as these may cause damage to the  
cabinet or LCD panel.  
Cabinet  
To remove stains, wipe the cabinet with a soft, lightly moistened cloth using a mild  
detergent. Do not spray wax or cleaner directly into the cabinet. (For details, refer to the  
manual of the PC.)  
LCD Panel  
The LCD surface can be cleaned with a soft cloth, such as cotton or lens paper.  
If necessary, stubborn stains can be removed by moistening part of a cloth with water  
to enhance its cleaning power.  
40 8. CLEANING  
 
English  
9. SPECIFICATIONS  
LCD Panel  
38 cm (15 inch), TFT color LCD panel with Anti-Glare Hard  
Coating, Viewing Angle: Horizontal: 160°, Vertical: 150°  
(at Contrast Ratio 5)  
Dot Pitch  
0.280 mm  
Horizontal Scan Frequency  
Vertical Scan Frequency  
31 61 kHz (Automatic) (Digital): 31 ~ 49 kHz  
50 Hz 85 Hz (Automatic) (1024 x 768: up to 75 Hz)  
(Digital): 60 Hz, (VGA TEXT : 70 Hz)  
Resolution  
1024 dots x 768 lines  
80 MHz (Digital: 65 MHz)  
16 million colors (max)  
Dot Clock (Max.)  
Display Colors  
Display Area  
304 mm (H) x 228 mm (V) (12.0” (H) x 9.0” (V))  
(Viewable image size: 380 mm (15.0”))  
Power Supply  
100-120/200-240 VAC 10%, 50/60 Hz, 0.8 /0.5 A  
Min.: 35 W  
Power Consumption  
Max.: 50 W (With speaker and USB hub)  
Power Saving Mode: Less than 5 W (When the optional  
speaker and the USB hub are not connected.)  
Input Connector  
DVI-I x 2  
Analog Input Signal (Sync)  
a) Separate, TTL, Positive/Negative  
b) Composite, TTL, Positive/Negative  
c) Sync on Green, 0.3 Vp-p, Negative  
0.7Vp-p/75Positive  
Analog Input Signal (Video)  
Input Signal (Digital)  
Signal registration  
Plug & Play  
TMDS (Single Link))  
28 (Factory preset: 15)  
VESA DDC 2B  
Dimensions  
340 mm (W) x 369 mm (H) x 175 mm (D)  
(13.4”(W) x 14.5”(H) x 6.9”(D))  
Dimensions (without stand)  
340 mm (W) x 267 mm (H) x 61 mm (D)  
(13.4”(W) x 10.5”(H) x 2.4”(D))  
Weight  
4.3 kg (9.5 lbs.)  
3.2 kg (7.1 lbs.)  
Weight (without stand)  
Temperature  
Operating: 0°C 35°C (32°F 95°F)  
Storage: -20°C 60°C (-4°F 140°F)  
Humidity 30% to 80% R.H. Non-condensing  
USB standard  
Rev. 1.1 complied self-powered hub  
12 Mbps (full), 1.5 Mbps (low)  
500 mA for each (Max.)  
Communication speed  
Downstream power supply  
USB ports  
Upstream port x 1, Downstream port x 2  
Certifications and Standards  
100-120 VAC  
NRTL/C-TÜV, FCC-B, TCO’99*1, EPA ENERGY STAR  
Program, TÜV/Rheinland Ergonomics Approved  
CE, CB, TÜV Rheinland/GS, TCO’99*1, EPA ENERGY STAR  
Program, TÜV/Rheinland Ergonomics Approved  
200-240 VAC  
*1 Applicable to gray (standard) color version only.  
9. SPECIFICATIONS 41  
 
English  
Default settings  
Analog input  
100%  
Digital input  
100%  
Contrast  
Brightness  
100%  
100%  
Smoothing  
3
ColorManagement  
Color Mode  
Temperature  
Standard  
Off (Normal white)  
VESA DPMS  
Full  
PowerManager  
Screen Size  
DVI DMPM  
Input Priority  
Menu Off Timer  
Menu Settings  
Signal 1  
Disable  
Normal  
Menu Size  
Menu Off Timer  
45 seconds  
On  
Beep  
Language  
English  
Beeper settings  
Short beep  
ScreenManager item selected.  
ScreenManager parameter adjusted to minimum or maximum  
limit.  
Input signal selection button pressed.  
Auto Adjustment button pressed.  
ScreenManager data-save executed.  
Monitor not connected correctly.  
PC turned off.  
Long beep  
4 short beeps  
Monitor received unsupported signal frequency.  
2 short beeps every  
15 sec.  
Monitor is in the advance notice mode of the Off Timer. The power  
will be off within fifteen minutes.  
Dimensions  
mm (inches)  
340(13.4)  
45  
45  
141(5.6)  
166(6.5)  
166(6.5)  
49(1.9)  
49(1.9)  
268.6(10.6)  
42 9. SPECIFICATIONS  
 
English  
Pin Assignment  
DVI-I Connector  
3
1
9
17  
2
4
12  
20  
6
7
8
16  
24  
5
13  
21  
C1 C2  
10 11  
19  
14 15  
22 23  
C3 C4  
C5  
18  
Pin No.  
Signal  
Pin No.  
Signal  
Pin No.  
Signal  
1
2
3
TMDS Data2-  
TMDS Data2+  
TMDS Data2/4 Shield  
11  
12  
13  
TMDS Data1/3 Shield  
21  
22  
23  
NC  
NC  
NC  
TMDS Clock shield  
TMDS Clock+  
4
5
NC*  
NC  
14  
+5V Power  
24  
C1  
TMDS Clock-  
Analog Red  
15 Ground (return for +5V,  
Hsync and Vsync)  
6
7
8
9
DDC Clock (SCL)  
DDC Data (SDA)  
Analog Vertical Sync  
TMDS Data1-  
16  
17  
18  
19  
Hot Plug Detect  
TMDS Data0-  
TMDS Data0+  
C2  
C3  
C4  
C5  
Analog Green  
Analog Blue  
Analog Horizontal Sync  
TMDS Data0/5 Shield  
Analog Ground  
(analog R, G, & B return)  
10  
TMDS Data1+  
20  
Downstream  
Series A  
NC  
(*NC: No Connection)  
USB Ports  
No.  
Signal  
Signal  
Upstream  
1
2
3
VCC  
- Data  
+ Data  
Cable power  
Serial data  
Serial data  
Series B  
4
Ground  
Cable Ground  
9. SPECIFICATIONS 43  
 
English  
10. GLOSSARY  
Afterimage  
The Afterimage is particular to LCD monitors when the monitor screen is left on for  
a long period without use. The “Afterimage” can be removed gradually by changing  
the displayed image.  
Clock  
With the analog input signal display, the analog signal is converted to a digital signal  
by the LCD circuitry. To convert the signal correctly, the LCD monitor needs to  
produce the same number clock pulse as the dot clock of the graphics system. When  
the clock pulse is not correctly set, some vertical bars of distortion are displayed on  
the screen.  
DVI  
(Digital Visual Interface)  
A digital flat panel interface. DVI can transmit digital data from the PC directly  
without loss with the signal transition method “TMDS”.  
There are two kinds of DVI connectors. One is DVI-D connector for digital signal  
input only. The other is DVI-I connector for both digital and analog signal inputs.  
DVI DMPM  
(DVI Digital Monitor Power Management)  
The Power management system for the digital interface. The “Monitor ON” status  
(operation mode) and the “Active Off” status (power-saving mode) are indispensable  
for the DVI-DMPM as the monitor’s power mode.  
EIZO MPMS  
(EIZO Monitor PowerManager Signaling)  
EIZO MPMS, “EIZO Monitor PowerManager Signaling” also enables power saving  
on the monitor side. EIZO MPMS recognizes video signals from the PC when the PC  
is in a power saving mode, and reduces energy consumption of the monitor.  
Gain Adjustment  
Adjusts each color parameter for red, green and blue. The color of the LCD monitor  
is displayed through the color filter of the LCD panel. Red, green and blue are the  
three primary colors. The colors on the monitor are displayed by combining these  
three colors. The color tone can change by adjusting the illumination amount passed  
through each color’s filter.  
Phase  
The phase adjustment decides the sampling timing point for converting the analog  
input signal to a digital signal. Adjusting the phase after the clock adjustment will  
produce a clear screen.  
44 10. GLOSSARY  
 
English  
Range Adjustment  
The Range Adjustment controls the level of output signal range to display the whole  
color gradation.  
Resolution  
The LCD panel consists of a fixed number of pixel elements which are illuminated to  
form the screen image. The EIZO L375 display panel consists of 1024 horizontal  
pixels and 768 vertical pixels. At a resolution of 1024 x 768, all pixels are displayed  
as a full screen.  
sRGB (Standard RGB)  
“International Standard for Red, Green, and Blue color space”  
A color space was defined with the aim of the color matching between applications  
and hardware devices, such as monitors, scanners, printers and digital cameras. As a  
standard default space, sRGB allows Internet users to closely match colors.  
Temperature  
Color temperature is a method to measure the white color tone, generally indicated in  
degrees Kelvin. At high temperatures the white tone appears somewhat blue, while at  
lower temperatures it appears somewhat red. Computer monitors generally give best  
performance at high temperature settings.  
5,000K: Often used in printing industry.  
6,500K: Good for video-image display.  
9,300K: Default setting for your EIZO monitor.  
TMDS  
(Transition Minimized Differential Signaling)  
A signal transition method for the digital interface  
VESA DPMS  
(Video Electronics Standard Association – Display Power Management Signaling)  
The acronym VESA stands for “Video Electronics Standards Association”, and  
DPMS stands for “Display Power Management Signaling.” DPMS is a  
communication standard that PCs and graphics boards use to implement power  
savings on the monitor side.  
10. GLOSSARY 45  
 
APPENDIX/ANHANG/ANNEXE  
Preset Timing Chart for Analog input  
Timing-Übersichten für Analog Eingang  
Synchronisation des Signaux pour Analog numerique  
Based on the signal diagram shown below 15 factory presets have been registered in the  
monitor's microprocessor.  
Der integrierte Mikroprozessor des Monitors unterstützt 15 werkseitige  
Standardeinstellungen (siehe hierzu die nachfolgenden Diagramme).  
15 signaux ont été enregistrés en usine dans le microprocesseur du moniteur,  
conformément au diagramme de synchronisation ci-dessous.  
A
B
C
D
E
F
Front Porch  
Sync Period  
Vordere Schwarzschulter  
Synchronimpuls  
Front avant  
Délai de synchronisation  
Front arrière  
Back Porch  
Hintere Schwartzschulter  
Austastzeit  
Blanking Period  
Display period  
Total cycle  
Délai de clignotement  
Délai d’affichage  
Cycle total  
Displya-Zeit  
Kompletter Zyklus  
Sync-Signalpegel  
H
Sync signal level  
Niveau du signal de  
synchronisation  
V
Video signal level  
Video-Signalpegel  
Niveau du signal vidéo  
APPENDIX/ANHANG/ANNEXE  
i
 
Dot Clock  
MHz  
Sync Polarity  
Frequencies  
H kHz V Hz  
A: Front Porch  
B: Sync Period  
V ms/  
Mode  
VGA  
H
V
H µs/Dot V ms/Line H µs/ Dot  
Line  
0.054/  
2
Nega. Nega.  
25.175  
28.322  
30.24  
57.28  
31.5  
31.469 59.940  
0.318/  
8
0.064/  
2
3.813/  
96  
640 × 480  
Nega. Posi.  
VGA  
720 × 400  
31.468 70.087  
0.636/  
18  
0.381/  
12  
3.813/  
108  
0.064/  
2
Posi.  
Posi.  
Posi.  
Posi.  
Macintosh  
640 × 480  
35.00  
49.73  
37.86  
37.50  
43.27  
35.16  
37.88  
48.08  
46.88  
66.67  
74.55  
72.81  
75.00  
85.01  
56.25  
60.32  
72.19  
75.00  
2.116/  
64  
0.086/  
3
2.116/  
64  
0.086/  
3
Macintosh  
832 × 624  
0.559/  
32  
0.020/  
1
1.117/  
64  
0.060/  
3
Nega. Nega.  
Nega. Nega.  
Nega. Nega.  
VESA  
640 × 480  
0.508/  
16  
0.026/  
1
1.270/  
40  
0.079/  
3
VESA  
640 × 480  
31.5  
0.508/  
16  
0.027/  
1
2.032/  
67  
0.080/  
3
VESA  
640 × 480  
36.0  
1.556/  
56  
0.023/  
1
1.556/  
56  
0.069/  
3
Posi.  
Posi.  
Posi.  
Posi.  
Posi.  
Posi.  
Posi.  
Posi.  
Posi.  
Posi.  
VESA  
800 × 600  
36.0  
0.667/  
24  
0.028/  
1
2.000/  
72  
0.057/  
2
VESA  
800 × 600  
40.0  
1.000/  
40  
0.026/  
1
3.200/  
128  
0.106/  
4
VESA  
800 × 600  
50.0  
1.120/  
56  
0.770/  
37  
2.400/  
120  
0.125/  
6
VESA  
800 × 600  
49.5  
0.323/  
16  
0.021/  
1
1.616/  
80  
0.064/  
3
VESA  
800 × 600  
56.25  
65.0  
53.674 85.061  
0.569/  
32  
0.019/  
1
1.138/  
64  
0.056/  
3
Nega. Nega.  
Nega. Nega.  
VESA  
1024 × 768  
48.36  
56.48  
60.02  
60.00  
70.07  
75.03  
0.369/  
24  
0.062/  
3
2.092/  
136  
0.124/  
6
VESA  
1024 × 768  
75.0  
0.320/  
24  
0.053/  
3
1.813/  
136  
0.106/  
6
Posi.  
Posi.  
VESA  
1024 × 768  
78.75  
0.203/  
16  
0.017/  
1
1.219/  
96  
0.050/  
3
ii  
APPENDIX/ANHANG/ANNEXE  
 
C: Back Porch  
D: Blanking Period  
E: Display Period  
F:Total Cycle  
H µs/ Dot V ms/ Line H µs/ Dot V ms/ Line H µs/ Dot V ms/ Line H µs/ Dot V ms/ Line  
1.589/  
40  
0.794/  
25  
5.720/  
144  
0.922/  
29  
25.442/  
640  
15.253/  
480  
31.778/  
800  
16.683/  
525  
1.907/  
54  
1.111/  
35  
6.356/  
180  
1.556/  
49  
25.422/  
720  
12.711/  
400  
31.778/  
900  
14.267/  
449  
3.175/  
96  
1.114/  
39  
7.407/  
224  
1.286/  
45  
21.164/  
640  
13.714/  
480  
28.571/  
864  
15.000/  
525  
3.911/  
224  
0.784/  
39  
5.587/  
320  
0.865/  
43  
14.525/  
832  
12.550/  
624  
20.112/  
1152  
13.415/  
667  
3.810/  
120  
0.528/  
20  
5.587/  
176  
0.634/  
24  
20.317/  
640  
12.678/  
480  
26.413/  
832  
13.735/  
520  
3.810/  
120  
0.427/  
16  
6.349/  
200  
0.533/  
20  
20.317/  
640  
12.800/  
481  
26.667/  
840  
13.333/  
500  
2.222/  
80  
0.578/  
25  
5.333/  
192  
0.670/  
29  
17.778/  
640  
11.093/  
480  
23.111/  
832  
11.764/  
509  
3.556/  
128  
0.626/  
22  
6.222/  
224  
0.711/  
25  
22.222/  
800  
17.067/  
600  
28.444/  
1024  
17.778/  
625  
2.200/  
88  
0.607/  
23  
6.400/  
256  
0.739/  
28  
20.000/  
800  
15.840/  
600  
26.400/  
1056  
16.579/  
628  
1.280/  
64  
0.478/  
23  
4.800/  
240  
1.373/  
66  
16.000/  
800  
12.480/  
600  
20.800/  
1040  
13.853/  
666  
3.232/  
160  
0.448/  
21  
5.172/  
256  
0.533/  
25  
16.162/  
800  
12.800/  
600  
21.333/  
1056  
13.333/  
625  
2.702/  
152  
0.503/  
27  
4.409/  
248  
0.578/  
31  
14.222/  
800  
11.179/  
600  
18.631/  
1048  
11.756/  
631  
2.462/  
160  
0.600/  
29  
4.923/  
320  
0.786/  
38  
15.754/  
1024  
15.880/  
768  
20.677/  
1344  
16.666/  
806  
19.20/  
144  
0.513/  
29  
4.053/  
304  
0.673/  
38  
13.653/  
1024  
13.599/  
768  
17.707/  
1328  
14.272/  
806  
2.235/  
176  
0.466/  
28  
3.657/  
288  
0.533/  
32  
13.003/  
1024  
12.795/  
768  
16.660/  
1312  
13.328/  
800  
APPENDIX/ANHANG/ANNEXE iii  
 
[Applicable to gray (standard color version only).]  
Congratulations!  
You have just purchased a TCO’99 approved and labelled product!  
Your choice has provided you with a product developed for  
professional use. Your purchase has also contributed to reducing  
the burden on the environment and also to the further development  
of environmentally adapted electronics products.  
Why do we have environmentally labelled computers?  
In many countries, environmental labelling has become an established method for encouraging  
the adaptation of goods and services to the environment. The main problem, as far as computers  
and other electronics equipment are concerned, is that environmentally harmful substances are  
used both in the products and during their manufacture. Since it is not so far possible to  
satisfactorily recycle the majority of electronics equipment, most of these potentially damaging  
substances sooner or later enter nature.  
There are also other characteristics of a computer, such as energy consumption levels, that are  
important from the viewpoints of both the work (internal) and natural (external) environments.  
Since all methods of electricity generation have a negative effect on the environment (e.g. acidic  
and climate-influencing emissions, radioactive waste), it is vital to save energy. Electronics  
equipment in offices is often left running continuously and thereby consumes a lot of energy.  
What does labelling involve?  
This product meets the requirements for the TCO’99 scheme which provides for international  
and environmental labelling of personal computers. The labelling scheme was developed as a  
joint effort by the TCO (The Swedish Confederation of Professional Employees), Svenska  
Naturskyddsforeningen (The Swedish Society for Nature Conservation) and Statens  
Energimyndighet (The Swedish National Energy Administration).  
Approval requirements cover a wide range of issues: environment, ergonomics, usability, emission  
of electric and magnetic fields, energy consumption and electrical and fire safety.  
The environmental demands impose restrictions on the presence and use of heavy metals,  
brominated and chlorinated flame retardants, CFCs (freons) and chlorinated solvents, among  
other things. The product must be prepared for recycling and the manufacturer is obliged to have  
an environmental policy which must be adhered to in each country where the company  
implements its operational policy.  
The energy requirements include a demand that the computer and/or display, after a certain  
period of inactivity, shall reduce its power consumption to a lower level in one or more stages.  
The length of time to reactivate the computer shall be reasonable for the user.  
Labelled products must meet strict environmental demands, for example, in respect of the  
reduction of electric and magnetic fields, physical and visual ergonomics and good usability.  
You will find a brief summary of the environmental requirements met by this product on the  
right. The complete environmental criteria document may be ordered from:  
TCO Development  
SE-114 94 Stockholm, Sweden  
Fax: +46 8 782 92 07  
Email (Internet): [email protected]  
Current information regarding TCO’99 approved and labelled products may also be obtained  
 
Environmental Requirements  
Flame retardants  
Flame retardants are present in printed circuit boards, cables, wires, casings and housings.  
Their purpose is to prevent, or at least to delay the spread of fire. Up to 30% of the plastic in  
a computer casing can consist of flame retardant substances. Most flame retardants contain  
bromine or chloride, and those flame retardants are chemically related to another group of  
environmental toxins, PCBs. Both the flame retardants containing bromine or chloride and the  
PCBs are suspected of giving rise to severe health effects, including reproductive damage in  
fish-eating birds and mammals, due to the bio-accumulative* processes. Flame retardants have  
been found in human blood and researchers fear that disturbances in foetus development may  
occur.  
The relevant TCO’99 demand requires that plastic components weighing more than 25 grams  
must not contain flame retardants with organically bound bromine or chlorine. Flame  
retardants are allowed in the printed circuit boards since no substitutes are available.  
Cadmium**  
Cadmium is present in rechargeable batteries and in the colour-generating layers of certain  
computer displays. Cadmium damages the nervous system and is toxic in high doses.  
The relevant TCO’99 requirement states that batteries, the colour-generating layers of display  
screens and the electrical or electronics components must not contain any cadmium.  
Mercury**  
Mercury is sometimes found in batteries, relays and switches. It damages the nervous system  
and is toxic in high doses.  
The relevant TCO’99 requirement states that batteries may not contain any mercury. It also  
demands that mercury is not present in any of the electrical or electronics components  
associated with the labelled unit.  
CFCs (freons)  
The relevant TCO’99 requirement states that neither CFCs nor HCFCs may be used during  
the manufacture and assembly of the product. CFCs (freons) are sometimes used for washing  
printed circuit boards. CFCs break down ozone and thereby damage the ozone layer in the  
stratosphere, causing increased reception on earth of ultraviolet light with e.g. increased risks  
of skin cancer (malignant melanoma) as a consequence.  
Lead**  
Lead can be found in picture tubes, display screens, solders and capacitors. Lead damages the  
nervous system and in higher doses, causes lead poisoning.  
The relevant TCO’99 requirement permits the inclusion of lead since no replacement has yet  
been developed.  
* Bio-accumulative is defined as substances which accumulate within living organisms.  
** Lead, Cadmium and Mercury are haevy metals which are Bio-accumulative.  
 
For U.S.A, Canada, etc. (rated 100-120 Vac) Only  
FCC Declaration of Conformity  
We, the Responsible Party  
EIZO NANAO TECHNOLOGIES INC.  
5710 Warland Drive, Cypress, CA 90630  
Phone: (562) 431-5011  
declare that the product  
Trade name: EIZO  
Model: FlexScan L375  
is in conformity with Part 15 of the FCC Rules. Operation of this product is subject to the  
following two conditions: (1) this device may not cause harmful interference, and (2) this  
device must accept any interference received, including interference that may cause undesired  
operation.  
This equipment has been tested and found to comply with the limits for a Class B digital  
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide  
reasonable protection against harmful interference in a residential installation. This  
equipment generates, uses, and can radiate radio frequency energy and, if not installed and  
used in accordance with the instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will not occur in a  
particular installation. If this equipment does cause harmful interference to radio or  
television reception, which can be determined by turning the equipment off and on, the user  
is encouraged to try to correct the interference by one or more of the following measures.  
* Reorient or relocate the receiving antenna.  
* Increase the separation between the equipment and receiver.  
* Connect the equipment into an outlet on a circuit different from that to which the receiver  
is connected.  
* Consult the dealer or an experienced radio/TV technician for help.  
Changes or modifications not expressly approved by the party responsible for compliance  
could void the user’s authority to operate the equipment.  
Note  
Use the attached specified cable below or EIZO signal cable with this monitor so as to keep  
interference within the limits of a Class B digital device.  
- AC Cord  
- Shielded Signal Cable (enclosed)  
Canadian Notice  
This Class B digital apparatus complies with Canadian ICES-003.  
Cet appareil numérique de le classe B est comforme à la norme NMB-003 du Canada.  
 
Hinweis zur Ergonomie :  
Dieser Monitor erfüllt die Anforderungen an die Ergonomie nach EK1-ITB 2000 mit dem  
Videosignal, 1024 Punkte × 768 Zeilen, RGB analog, 0,7 Vp-p und mindestens 75,0 Hz  
Bildwiederholfrequenz, non interlaced. Weiterhin wird aus ergonomischen Gründen empfohlen,  
die Grundfarbe Blau nicht auf dunklem Untergrund zu verwenden (schlechte Erkennbarkeit,  
Augenbelastung bei zu geringem Zeichenkontrast.)  
Recycle Auskunft  
Die Rücknahme dieses Produktes nach Nutzungsende übernimmt EIZO in Deutschland  
zusammen mit dem Partner von Roll MBB Recycling GmbH.Dort werden die Geräte in ihre  
Bestandteile zerlegt, die dann der Wiederverwertung zugeführt werden. Um einen Abholtermin  
zu vereinbaren und die aktuellen Kosten zu erfahren, benutzen Sie bitte folgende Rufnummer:  
02153-73 35 00. Weitere Informationen finden Sie auch unter der Internet-Adresse:  
 

Fluke Welder PN 643657 User Manual
Furuno Stereo Receiver MFD8 12 BB User Manual
Gateway Personal Computer Profile 4 User Manual
GE Convection Oven JTP70SMSS User Manual
GE Convection Oven PT920SM User Manual
GE Marine Battery PGP989DN TN User Manual
Gemini Turntable SA 600 User Manual
GE Monogram Dishwasher ZBD6800KBB User Manual
GE Monogram Microwave Oven JVM1540LNCS User Manual
GE Washer 175D1807P396 User Manual