GE Monogram Ventilation Hood ZV48SSFSS User Manual

ZV48SSFSS – GE Monogram 48" Stainless Steel Professional Hood  
Dimensions and Specifications (in inches)  
47-15/16"  
12"  
18"  
47-15/16"  
25"  
Installation Clearances  
These vent hoods are designed to be installed onto a wall or beneath a  
Note: Clearances may vary due to type of cooking product and local  
codes. Check with local inspectors to be sure standard is applicable.  
soffit or cabinet.  
Install these hoods* 30" Min. to 36" Max. above the cooking surface.  
*These hoods may be installed 24" min. above a gas or electric drop-in  
style cooktop. Always observe the 30" to 36" clearance when installed  
over any professional style cooktop or range.  
Soffit Installation  
Wall Mount Installation  
SOFFIT  
30" MIN.  
36" MAX.  
30" MIN.  
36" MAX.  
In this installation the ductwork running from the top of the hood will  
be concealed in the soffit or upper cabinetry.  
For this installation, a decorative duct cover is available to conceal the  
ductwork running from the top of the hood. Use of the duct cover requires  
special consideration to the installation height above the countertop.  
®
For answers to your Monogram, GE Profile or  
GE appliance questions, visit our website at  
GEAppliances.com or call  
Listed by  
Underwriters  
Laboratories  
R
®
GE Answer Center service, 800.626.2000.  
Specification Created 10/02  
 
ZV48SSFSS GE Monogram 48" Stainless Steel Professional Hood  
Using Duct Cover Accessories  
To avoid unsightly gaps, plan the hood installation height for duct covers  
use. Use the following formula to calculate the need for one of more  
duct covers and to ensure a trouble free installation.  
We recommend that the vent hood and decorative duct cover (if used)  
be on site before final framing and wall finishing. This will help to  
accurately locate studs, ductwork and electrical service.  
Read these examples carefully to determine the need for one or more  
Ceiling Height  
B
6" or 12" duct covers.  
A = Countertop to ceiling height.  
B = Gap at the top of the hood to the ceiling.  
C = Hood installation height Plus 18" hood height.  
18" Hood  
Height  
A
NOTE: Dia. C should be between 48" and 54" (for a 30" to 36" installation  
height). Raise or lower the hood installation height to allow use of one  
or more 6" and 12" duct covers.  
C
A - B = C  
INSTALLATION EXAMPLES  
10 ft. Ceiling  
30"  
9 ft. Ceiling  
8 ft. Ceiling  
12"  
24"  
30"  
36"  
30"  
8 ft. ceilings: When the hood is installed 30"  
above the cooking surface and there is no  
soffit or upper cabinetry, order one 12" duct  
cover accessory.  
9 ft. ceilings: When the hood is installed 30"  
above the cooking surface, order two 12" duct  
cover accessories.  
10 ft. ceilings: When the hood is installed 36"  
above the cooking surface, order three 12" and  
one 6" duct cover accessories.  
®
For answers to your Monogram, GE Profile or  
GE appliance questions, visit our website at  
GEAppliances.com or call  
Listed by  
Underwriters  
Laboratories  
R
®
GE Answer Center service, 800.626.2000.  
Specification Created 10/02  
 
ZV48SSFSS GE Monogram 48" Stainless Steel Professional Hood  
Features and Benefits  
1200 CFM Vertical Exhaust with Dual Blowers  
Variable Speed Fan Control  
3 Halogen Lamps with 4 Lighting Levels  
Infrared Warming Lamps  
Utensil Rod  
Removable Grease Trays  
Removable Baffle Stainless Steel Filters  
Model ZV48SSFSS Stainless steel  
Specification Created 10/02  
 

Earlex Paint Sprayer hv5500 User Manual
Echo Hair Clippers HCA 260 User Manual
Ei Electronics Carbon Monoxide Alarm Ei 261DEN User Manual
EverFocus Digital Camera EQ550 User Manual
Fisher Paykel Double Oven OR30SDPWGX User Manual
Frigidaire Microwave Oven 316495063 User Manual
Gateway Computer Hardware S466 User Manual
GE Clothes Dryer 131892900 User Manual
Gianni Industries Power Supply PSB3A 2A 115 User Manual
Global Upholstery Co Indoor Furnishings Supra X User Manual