Fujitsu Printer FTP 632MCL001 User Manual

24V DRIVE, HIGH SPEED LINE  
THERMAL PRINTER  
3” MECHANISM, WITH OR WITHOUT CUTTER  
FTP-632MCL001/002/303/304  
OVERVIEW  
FTP-632MCL/FTP-622DCL Series is an ultra high speed line  
thermal printer driven by 24 VDC, printing on 3-inch wide paper  
(80 mm/85 mm).  
This printer is compact and light weight, and the design allows  
easy head maintenance, head cleaning and head replacement.  
This printer is suitable for a variety of applications, such as POS  
terminals, ticket machines, coupon machines, label printers,  
medical instruments, etc. A printer with a specially designed  
cutter is also available.  
FTP-632MCL001  
HIGHLIGHTS  
• Ultra high speed printing  
It can print at 80 mm/s (640 dotlines/s) maximum by using  
Fujitsu Components' unique head drive control.  
• Compact and lightweight  
This printer has a low profile of only 20 mm, and a light  
weight of approximately 94 g.  
• Low power consumption  
The peak current for head driving is approximately 2.9 A (at  
80 mm/s printing speed, 50% printing ratio).  
FTP-632MCL303/304  
• Easy head access  
It is designed for easy head cleaning and head replacement.  
• Paper auto loading function  
Thermal paper can be loaded without head-up lever  
operation.  
• ESC/POSTM*1 Commands  
The commands conform to ESC/POSTM.  
• Auto Cutter  
Printer with auto cutter (full cut/partial cut) is also available.  
• UL Recognized  
File No.E171434  
*1 ESC/POSTM is a registered trademark of SEIKO EPSON Corp.  
FTP-622DCL001  
1
 
FTP-632MCL001/002/303/304  
(Continued)  
Item  
Specifications  
Part number  
Interface  
FTP-632MCL001/002  
FTP-632MCL303/304  
Centronics (ESC/POSTM), RS232C  
24 VDC ± 5%, Voltage  
2
Current : average*  
(
): Peak  
For head  
1.11 (1.45) A (at 80 mm/s printing speed, 25% printing ratio)  
0.81 (1.45) A (at 50 mm/s printing speed, 25% printing ratio)  
0.75 (0.87) A (at 30 mm/s printing speed, 25% printing ratio)  
Power supply  
Dimensions  
For motor  
24 VDC ± 5%, 1.0 A maximum  
For cutter  
---  
24 VDC ± 5%, 1.0 A maximum  
For logic  
5 VDC ± 5%, 0.5 A maximum  
108 (W) × 48 (D) × 20 (H) mm (Excluding lever)  
131 (W) × 89 (D) × 24 (H) mm  
approximately 94 g  
Mechanism  
Interface board  
117 (W) × 57 (D) × 38 (H) mm  
Weight  
approximately 330 g  
Pulse durability : 1 × 108 pulse/dot (using Fujitsu's standard driving  
method)  
Wear resistance : 50 km (at 25% printing ratio)  
Expected life  
Mechanism  
Cutter  
---  
500,000 cuts  
3
Operating temperature 0 to +50°C*  
Environmental  
conditions  
Operating humidity  
Storage temperature  
Storage humidity  
Head temperature  
Paper out/Mark detect  
Head-up  
20 to 85% RH (no condensation)  
–20 to +60°C (excluding paper)  
5 to 95% RH (no condensation)  
By thermistor (applied energy control, abnormal temperature detection)  
Detection  
By photointerrupter  
By microswitch  
For front insertion use (80 mm width)  
For rear insertion use (85 mm width)  
*Recommended papers  
· Oji Paper  
· NIPPON Paper  
· MITSUBISHI Paper Mills  
: FTP-030PU001, FTP-030P0701  
: FTP-030P0020, FTP-030P0702  
Recommended thermal sensitive paper  
: PD150R, PD160R, PD170R  
: TF50KS-E,TF60KS-E,TF60KJ-R  
: P220VBB-1, AFP-235  
*1: There may be exceptions.  
*2: 24 VDC, minimum head resistance.  
*3: Guarantee: +5°C ~+40°C.  
3
 
FTP-632MCL001/002/303/304  
DIMENSIONS  
Mechanism  
FTP-632MCL001/002  
PAPER INSERTION(MCL001)  
20.1  
HEAD UP LEVER(AT HEAD DOWN)  
CENTER OF PAPER  
PAPER  
INSERTION  
(MCL002)  
HEAD CONNECTOR  
76.8(POSITIONING HOLE PITCH)  
+
1
57.0 –  
50.9  
Unit: mm  
(107.9)  
Interface board  
130.8  
120.7  
116.8  
87.6  
19.1  
5.1  
5.1  
CN2**  
CN5  
CN3  
4—ø3.6  
CN10  
CN11*  
CN13  
5.1  
5.1  
43.2  
95.4  
105.4  
120.7  
*CN11 on FTP-622DCL011/111 & 622DSL011/112 only  
**CN2 on FTP- 622DSL only  
Unit: mm  
4
 
FTP-632MCL001/002/303/304  
DIMENSIONS  
Mechanism  
FTP-632MCL303/304  
(cutter cable)  
(motor cable)  
Unit: mm  
Interface board  
130.8  
120.7  
116.8  
87.6  
5.1  
5.1  
19.1  
CN2*  
CN5  
CN3  
4-Ø3.6  
CN11  
CN13  
CN10  
5.1  
5.1  
43.2  
86.4  
105.4  
120.7  
Unit: mm  
*CN2 on FTP-622DSL only  
5
 
FTP-632MCL001/002/303/304  
CONNECTOR PIN ASSIGNMENT FOR PRINTER MECHANISM  
1. Thermal Head  
Head side : B16B-PH-K-S-2.2 (J.S.T.) or equivalent  
Board side : PHR-16 (J.S.T.) or equivalent  
*1: Symbol: " " means a negative logic signal  
Thermal head heat sink  
Motor  
Head up level  
1, 2, 3, ......................................15, 16  
Connector Pin No.  
2. Motor connectors  
3. Sensor connectors  
Motor side : PHR-4 (J.S.T.) or equivalent  
Board side : B4B-PH-K-S (J.S.T.) or equivalent  
Sensor  
: PHR-5 (J.S.T.) or equivalent  
Board side : B5B-PH-K-S (J.S.T.) or equivalent  
6
 
FTP-632MCL001/002/303/304  
4. Cutter  
Mech side : EHR-4 (J.S.T.) or equivalent  
Board side : B4B-EH (J.S.T.) or equivalent  
FUNCTION  
ITEM  
ITEM  
8. Cutter trouble detection  
9. Motor power save  
1.  
2.  
3.  
4.  
5.  
6.  
7.  
Test printing  
Paper-out detection  
Paper near end detection  
Head-up detection  
10.  
11.  
12.  
13.  
14.  
Mark detection  
MCU trouble detection  
Power on/off sequence protection  
Motor protection  
Abnormal temperature detection of thermal head  
Blown fuse detection  
Abnormal voltage detection of head  
Hardware timer  
INTERFACE, COMMAND, OPTIONS  
Please refer to the FTP-622DCL DATA SHEET and the FTP-622DSL DATA SHEET for Interface, Command, and  
Options.  
Europe  
Japan  
Fujitsu Components Europe B.V.  
Diamantlaan 25  
2132 WV Hoofddorp  
Netherlands  
Fujitsu Component Limited  
Gotanda-Chuo Building  
3-5, Higashigotanda 2-chome, Shinagawa-ku  
Tokyo 141, Japan  
Fujitsu Components  
International  
Headquarter  
Offices  
Tel: (31-23) 5560910  
Fax: (31-23) 5560950  
Tel: (81-3) 5449-7010  
Fax: (81-3) 5449-2626  
Asia Pacific  
North and South America  
Fujitsu Components America, Inc.  
250 E. Caribbean Drive  
Sunnyvale, CA 94089 U.S.A.  
Tel: (1-408) 745-4900  
Fujitsu Components Asia Ltd.  
102E Pasir Panjang Road  
#04-01 Citilink Warehouse Complex  
Singapore 118529  
Tel: (65) 6375-8560  
Fax: (1-408) 745-4970  
Fax: (65) 6273-3021  
© 2002 Fujitsu Components America, Inc. All company and product names are trademarks or registered  
trademarks of their respective owners. Rev. 06/2002  
7
 

Echo Trimmer RM 4000 User Manual
Extron electronic Network Card 13W3 to VGA User Manual
Garland Food Warmer ED 15THSE User Manual
Garland Oven MCO GD 10 User Manual
GE Cooktop JGP600AEH User Manual
GE Monogram Cooktop ZGU36L4RHSS User Manual
GE Monogram Refrigerator B480DX User Manual
GE Monogram Refrigerator ZFSB25DXSS User Manual
Genesis Advanced Technologies Cordless Drill GHD1260 User Manual
GE Water System GNUT05Z01 User Manual