Fujitsu Printer FTP 621MCL351 User Manual

24V DRIVE, ULTRA HIGH SPEED LINE THERMAL PRINTER  
2” MECHANISM, WITH AVAILABLE CUTTER  
FTP-621MCL351/352  
OVERVIEW  
This thermal printer (driven by 24 VDC) and cutter provide high  
speed printing for 2-inch wide paper (60 mm). This printer is  
small in size, light weight, and has low power consumption.  
The print head is designed with open construction for easy  
maintenance.  
This printer is suitable for a variety of applications, such as  
POS terminals, ticket machines, label printers, measuring  
devices and medical equipment.  
In addition to the interface board, a driving LSI (MCU + Gate  
Array) is also available.  
FTP-621MCL351/352 shown after  
assembly with FTP-621CT001cutter  
HIGHLIGHTS  
• Ultra high speed printing  
It can print at 100 mm/s (800 dotlines/s) by using Fujitsu  
Components' unique head drive control system.  
• Auto cutter  
Full or partial cutting are available by normal or reverse  
rotation of the motor (command set).  
• Low power consumption  
The peak current for head driving is approximately 2.2 A (at  
50 mm/s printing speed, 50% printing ratio).  
FTP-621CU102, FTP-633GA101  
• Easy head access  
Open head construction makes head maintenance easy,  
especially for head cleaning.  
• Paper auto loading function  
The thermal paper can be loaded without head-up lever  
operation.  
• High resolution  
8 dots/mm head provide clear print output.  
• Selectable paper paths  
Front or rear insertion types are available.  
FTP-621DCL013  
1
 
FTP-621MCL351/352  
(Continued)  
Item  
Specifications  
24 V DC ± 5%, average:*2  
0.41 (0.56) A (at 25 mm/s printing speed, 25% printing ratio)  
0.63 (1.11) A (at 50 mm/s printing speed, 25% printing ratio)  
1.23 (1.65) A (at 100 mm/s printing speed, 25% printing ratio)  
For head  
Power supply  
(
): Peak  
For motor  
For logic  
24 VDC ± 5%, 1.0 A maximum  
5 VDC ± 5%, 0.5 A maximum  
Weight  
Mechanism with cutter: approx. 450 g. Interface board: approx. 100 g  
Mechanism + cutter  
Interface board  
107 (W) × 60 (D) × 71.0 (H) mm (excluding connector)  
140 (W) × 89 (D) × 24.0 (H) mm  
Dimensions  
Pulse durability : 5 × 107 pulse/dot (using Fujitsu Takamisawa's standard  
driving method)  
Wear resistance : 50 km (at 12.5% printing ratio)  
Thermal head  
Life  
Cutter  
Cutting life: 3 × 105 times  
Operating temperature  
Operating humidity  
Storage temperature  
Storage humidity  
Head temperature  
Paper out/Mark detect  
Head-up  
+5 to +40°C*3  
Environmental  
conditions  
20 to 85% RH (no condensation)  
–20 to +60°C (excluding paper)  
5 to 95% RH (no condensation)  
By thermistor (applied energy control, abnormal temperature detection)  
By photointerrupter (command set)  
Detection  
By microswitch  
+0  
Paper width  
60 mm  
–1  
Recommended thermal sensitive  
paper*4  
1 ply paper in roll: FTP-020P0020  
*1: The data to be printed is automatically read out by the printer driver equipment memory (host system frame  
memory). The communication is parameter transfer.  
*2: At 25°C, maximum applied voltage, minimum head resistance, specified paper, stable printing ratio.  
*3: Temperature range for guaranteed printing density. It can operate at 0 to +40°C.  
*4: Please contact us for other thermal papers.  
3
 
FTP-621MCL351/352  
DIMENSIONS  
Printer mechanism with cutter  
1 1 . 8  
2.5 (Mounting hole)  
JAPAN  
2 5 . 4  
35.5 (Mounting hole)  
40.5  
7.5 (300)  
68 (At cutter open)  
12  
60  
4
 
FTP-621MCL351/352  
Interface board  
139.7  
129.6  
113.1  
22.9  
14.0  
22.3  
27.4  
4—ø3.6  
(5.1)  
CN3  
CN4  
CN12  
CN13  
CN2  
CN7  
88.9  
78.8  
28.0  
CN11  
25.4  
CN5  
CN6  
CN1  
CN10  
(5.1)  
(5.1)  
(5.1)  
(5.1)  
14.0  
31.8  
15.3  
88.9  
17  
Height of devices side  
Height of solder side  
23.6  
1.6  
5
Unit: mm  
INTERFACE, COMMAND, OPTIONS  
Please refer to the FTP-621DCL003/013 DATA SHEET for Interface, Command, and Options.  
5
 
FTP-621MCL351/352  
Europe  
Japan  
Fujitsu Components Europe B.V.  
Diamantlaan 25  
2132 WV Hoofddorp  
Netherlands  
Fujitsu Component Limited  
Gotanda-Chuo Building  
3-5, Higashigotanda 2-chome, Shinagawa-ku  
Tokyo 141, Japan  
Fujitsu Components  
International  
Headquarter  
Offices  
Tel: (31-23) 5560910  
Fax: (31-23) 5560950  
Tel: (81-3) 5449-7010  
Fax: (81-3) 5449-2626  
Asia Pacific  
North and South America  
Fujitsu Components America, Inc.  
250 E. Caribbean Drive  
Sunnyvale, CA 94089 U.S.A.  
Tel: (1-408) 745-4900  
Fujitsu Components Asia Ltd.  
102E Pasir Panjang Road  
#04-01 Citilink Warehouse Complex  
Singapore 118529  
Tel: (65) 375-8560  
Fax: (1-408) 745-4970  
Fax: (65) 273-3021  
© 2001 Fujitsu Components America, Inc. All company and product names are trademarks or registered  
trademarks of their respective owners. Rev. 09/2001  
6
 

EdgeStar Dishwasher DWP60ES User Manual
Edimax Technology Network Router Broadband Router User Manual
Everpure Water System CGCC 1 User Manual
EVGA Computer Hardware 132 YW E179 User Manual
Evolution Technologies Electronic Keyboard MK 416C User Manual
Extron electronic Stereo Amplifier P 2 DA2 EC F User Manual
Frontier Labs Spreader MS1102G User Manual
Fujitsu Server B120 User Manual
GE Air Conditioner AGE07AJ User Manual
GE Conference Phone 28031 User Manual