Frymaster Fryer CMIII5 User Manual

Dean, a member of the Commercial Food Equipment Service Association, recommends using  
CFESA Certified Technicians.  
Price: $6.00  
24-Hour Service Hotline 1-800-551-8633  
819-5893  
04-02  
 
FRYMASTER CMIII.5 COMPUTER  
OPERATING AND PROGRAMMING INSTRUCTIONS  
Operating Instructions  
2
1
4
3
5
6
8
7
ITEM  
DESCRIPTION  
Lighted Display — left display of various functions and operations.  
1
Lighted Display — right display of various functions and operations.  
2
3
Program Lock and Temperature Check Switch -- locks program in  
computer and/or displays frypot temperature when depressed.  
4/5  
6/7  
Power Switches — either switch turns power "ON" or "OFF".  
Product and Coding Switches — provides access to computer and  
programming functions.  
8
Programming Switch — used when reprogramming the computer  
memory.  
WARNING  
Before turning on computer, ensure the fryer is filled with cooking oil/shortening or  
water. NEVER allow water to enter the filtration system (if applicable).  
1
 
Operating Instructions  
Equipment Setup and Shutdown Procedures  
Setup  
WARNING  
Fill the frypot to the bottom OIL LEVEL line with vegetable oil before pressing the  
ON/OFF switch to the "ON" position. Failure to do so could damage the frypot.  
1. Fill the frypot with vegetable oil to the bottomOIL LEVEL line located on the rear of the frypot.  
This will allow for oil expansion as heat is applied. Do not fill cold oil any higher than the  
bottom line; overflow may occur as heat expands the oil. If solid shortening is used, pack solid  
shortening into the cool-zone of the frypot. Continue to pack shortening in frypot to the bottom  
OIL LEVEL line.  
2. Ensure that the power cord(s) is/are plugged into the appropriate receptacle(s). Verify that the  
face of the plug is flush with the outlet plate, with no portion of the prongs visible.  
3. Ensure that the vegetable oil level is at the top OIL LEVEL line when the vegetable oil is at its  
programmed cooking temperature. It may be necessary to add vegetable oil to bring the level up  
to the proper mark, after the oil has reached the programmed cooking temperature. If solid  
shortening is used, the MELT cycle MUST be used to melt the shortening. It may be necessary  
to add solid shortening to bring the level up to the proper mark after the packed shortening has  
melted. DO NOT DISABLE OR CANCEL THE MELT CYCLE UNTIL ALL SOLID  
SHORTENING HAS MELTED.  
Shutdown  
1. Press the ON/OFF switch  
to the "OFF" position (the display will show "OFF").  
2. Filter vegetable oil (if applicable) and clean fryers.  
3. Place the frypot covers on frypots.  
Operating the Fryer  
A. Turn the computer on by pressing the  
switch.  
1. One of the following displays will appear:  
a.  
, indicating that the burners are operating in the melt-cycle mode. Fryer will  
remain in the melt-cycle mode until it reaches 180°F (82°C) or is canceled manually.  
, indicating that the pot temperature is 21°F (12°C) or higher than the setpoint.  
, indicating that the pot temperature is 21°F (12°C) or lower than the setpoint.  
b.  
c.  
2
 
Equipment Setup and Shutdown Procedures (cont.)  
d. "  
" indicating that the fryer temperature is in the cooking range. NOTE: For best  
".  
results, do not cook product until the display reads "  
e.  
f.  
, indicates a heating problem.  
, indicates that the pot temperature is more than 410°F (210°C) [395°F (202°C) for  
CE (European Community) fryers].  
g.  
, indicates that the computer has detected a problem in the temperature measuring  
circuits, including probe.  
NOTE: "." decimal point between digits 1 and 2 in either display area indicates that the computer is  
cycling the burners "ON".  
B. Melt-Cycle Cancel Feature (built-in computers only).  
CAUTION  
Do not cancel the melt cycle mode if using solid shortening.  
The computer will display  
depress the "R" button  
during melt-cycle operation. To cancel melt cycle on a full pot,  
. To cancel the melt cycle on a split pot, use the "L" button for left-  
for right-side pot. will be replaced by . The decimal point  
side pot and the "R" button  
between digits 1 and 2 will illuminate indicating that the computer is cycling the burners "ON".  
C. Cook-cycle operation is initiated by pressing the product switch:  
1. The basket lift (on fryers so equipped) will lower the product into the cooking oil/  
shortening.  
2. The display will indicate the programmed cook time and begin countdown.  
3. If shake time is programmed, you will be notified to shake the product "X" seconds after the  
cook cycle begins (X= amount of time programmed). An alarm will sound and the display  
will read  
and the product number selected. If no shake time is programmed  
will  
not appear during the cook cycle.  
4. At the end of cooking cycle, an alarm will sound;  
will be displayed and the  
associated product switch indicator will flash. To cancel the cook alarm, press the flashing  
product switch.  
5. At this time, the hold time will be displayed (if programmed greater than 0) and countdown  
will begin. When the hold time counter reaches 0, an alarm will sound.  
product number selected is displayed. The hold alarm is canceled by pushing the  
If display is in use, hold time will count down invisibly until display is free.  
and the  
switch.  
3
 
Checking Temperature  
A. Check the cooking oil/shortening temperature at any time by pressing the  
switch once.  
Check the setpoint by pressing the  
switch twice.  
B. During the idle periods, when the fryer is on but not in use, "  
displays on a single frypot computer. "  
" should appear on both  
" will appear on the display of the side that is  
turned on in a split-vat computer. If not, check actual temperature and setpoint.  
C. If you suspect a defective probe, check the cooking oil/shortening temperature with a  
thermometer. Verify that the computer readout is reasonably close to your measured reading.  
NOTE: The electronic circuitry can be affected adversely by current fluctuations and electrical  
storms. If for no apparent reason the computer does not function or program properly, reset the  
computer by unplugging the power cord and plugging it back in.  
Programming The CMIII.5 Computer  
1. Activate the computer by pressing either  
switch.  
2. To enter the program mode, first press the  
switch.  
will appear in the left display. If  
switch again.  
you have pressed this switch in error and do not wish to program, press the  
Note: The computer will flash if cooking is in progress.  
3. Press  
4.  
(1 6 5 0) in that sequence to enter the program mode.  
(Setpoint) will appear in the left display. This is for setting the cooking temperature. The  
temperature previously selected will be displayed in the right display. Enter new temperature.  
Press the switch to lock in temperature setting. If the setting is correct, press the switch to  
advance to the next programming option.  
5.  
6.  
(Select Product) will appear in the left display. Press the product button to be  
programmed.  
will appear in the left display. The sensitivity number previously selected will be  
displayed in the right display. Enter the new desired sensitivity number, the range is 1 to 9.  
Enter "0" for no sensitivity. Press the  
switch to lock in the setting.  
Sensitivity adjusts computer-cooking time to compensate for the drop in cooking oil/shortening  
temperature when a basket of product is placed into the fryer. Sensitivity decreases or  
increases cooking time to counterbalance variances in product density, basket-load size, and  
initial temperature. A proper sensitivity setting will ensure a high quality product. For example:  
four ounces of fries can be programmed to cook to the same quality as two pounds. A good  
initial setting is 4 or 5. Some experimenting with the range of 1 to 9 may be required to  
achieve optimum quality.  
4
 
Programming The CMIII.5 Computer (cont.)  
7.  
will now appear in the left display. A previously entered cook-time will appear in the  
right display. If that time is correct, press the switch. If you wish to change the time, enter  
the desired time in minutes and seconds. (The new time will be displayed in the left display.)  
Press the switch to advance to the next option.  
8.  
now appears in the left display. The previous shake time (if any) will appear in the right  
display. If a product requires shaking during the cooking process, set the shake time by pressing  
the number of minutes to cook before shaking. Press the  
option. If no shake time is required, press "0" and press the  
time 3:00 minutes, shake after cooking 1:00 minute.  
switch to advance to the next  
switch. Example: Total cook  
At the end of 1:00 minute, a beeper will sound and the product button indicator will flash for  
three seconds.  
9.  
will now appear in the left display. Set the time to hold the cooked product from 13  
seconds to 60 minutes. Press the  
and press the switch.  
switch. If you do not wish to use the hold time, enter "0"  
10.  
14.  
will appear in the left display. If you desire to program more products, return to Step 5.  
If no more programming is required, lock in program by pressing the switch.  
will now appear in the left display. A previously entered cook-time will appear in the  
right display. If that time is correct, press the switch. If you wish to change the time, enter  
the desired time in minutes and seconds. (The new time will be displayed in the left display.)  
Press the switch to lock in the setting.  
Boil Feature  
CAUTION  
Do not drain water or boil-out solution into the filtration system (if applicable). Irreparable  
damage will result and void the warranty.  
1. Before switching the fryer "ON", close the frypot drain valve. Fill empty frypot with mixture of  
cold water and detergent. Follow detergent instructions when mixing.  
NOTE: When the computer is configured for a split-vat fryer, Boil Mode will not turn on both sides  
of the computer. Each side will have to be turned on and placed in Boil Mode separately.  
2. To program computer for Boil Feature, press either  
switch.  
2. Press the switch. will appear in the left display.  
5
 
Boil Feature (cont.)  
4. Enter  
(1 6 5 3) in that sequence. The right display will read  
. The  
temperature is automatically set for 195°F (91°C). The fryer will attain this temperature and  
remain there until either switch is pressed, which cancels the boil-out mode. In high-altitude  
locations, constantly monitor the fryer for boil-over conditions. If boil over occurs, turn off fryer  
immediately, allow to cool, and re-enter boil-out mode.  
Fryer Recovery Time Check  
1. To check recovery time, press the  
switch.  
will appear in the left display.  
3. Enter  
displays for 5 seconds.  
(1 6 5 2) in that sequence. The recovery time will appear in both  
Temperature Selection—Fahrenheit to Celsius  
1. To change the computer temperature from Fahrenheit to Celsius or Celsius to Fahrenheit, press  
either  
switch.  
2. Press the  
switch.  
will appear in the left display.  
3. Enter  
(1 6 5 8) in that sequence. The computer will automatically convert the  
temperature from Fahrenheit to Celsius or Celsius to Fahrenheit.  
4. Press the switch to display the temperature in the newly selected mode.  
Constant Oil Temperature Display Mode  
1. To program constant temperature display, press the  
switch.  
will appear in the left display.  
(1 6 5 L) in that sequence. The cooking oil/shortening temperature will  
2. Press the  
switch.  
3. Enter  
display constantly in the right display on a full-pot and in both displays on a split-pot.  
NOTE: During the product cooking process, the cooking time will not be displayed but timing will  
be taking place.  
4. To remove the constant oil-temperature display and display the cooking time, repeat Step 2 and  
Step 3.  
6
 
Dean, 8700 Line Avenue, PO Box 51000, Shreveport, Louisiana 71135-1000  
Shipping Address: 8700 Line Avenue, Shreveport, Louisiana 71106  
TEL 1-318-865-1711  
PRINTED IN THE UNITED STATES  
FAX (Parts) 1-310-327-3343  
FAX (Tech Support) 1-318-219-7135  
SERVICE HOTLINE  
1-800-551-8633  
Price: $6.00  
819-5893 04-02  
 

EarthStone Oven 110 Modular User Manual
Eiki Projector LC 4200 User Manual
Electro Voice Speaker System EVF 1152D 64 FG User Manual
EverFocus Automobile Electronics ez platecam 002 User Manual
Extron electronic Indoor Furnishings WPB 170 User Manual
Fujimoto Satellite Radio FKK 4 User Manual
Fujitsu Printer FTP604 User Manual
Fusion Marine GPS System MS AV600 User Manual
Gateway Personal Computer MT 6733 User Manual
GE Microwave Oven 49 4492 User Manual