Faber Work Light MR 11 User Manual

Halogen Bulb replacement instructions:  
If your halogen bulbs need replacement, please follow  
these instructions below. You will need a 1” wide  
suction cup, available thru Faber or local hardware store.  
Step 1  
Step 1: Purchase a new MR-11 or MR-16 (Pellicano),  
12 volt, 20 watt halogen bulb with a glass lens cover.  
Step 2: Using the suction cup gently push against the  
bulb in the hood making a seal around the bulb.  
Step 2  
Step 3  
Step 3: Pull down on the bulb with the suction cup, to  
remove the bulb from the hood  
Step 4: Place the new bulb into the hood, lining up  
the bulb prongs with the holes inside the hood.  
For more information please call Faber at  
508-358-5353 or email [email protected]  
Step 4  
 

Eagle Electronics SONAR 350 S MAP User Manual
Edimax Technology Network Card HP 8501 User Manual
Escali Scale E15CB User Manual
FMI Outdoor Gas Burner MF42ONE User Manual
Furuno Medical Alarms BR 500 User Manual
Garmin Hiking Equipment Hiking Equipment User Manual
GE Air Conditioner AZ28E12D User Manual
Gefen Switch EXT DVI 16416 User Manual
GE Toaster 168989 User Manual
Gitzo Camcorder Accessories G1098 User Manual