Estate Clothes Dryer EED4100S User Manual

Electric Dryer  
PRODUCT MODEL NUMBERS  
OVERALL DIMENSIONS  
EED4100S  
EED4300S  
EED4400S  
TEDS740P  
TEDS840P  
TEDX340R  
TEDX540R  
TEDX640P  
22¾"  
(57.8cm)  
15¼"  
(38.74cm)  
43³⁄₈"  
43³⁄₈"  
(110cm)  
(110cm)  
Electrical: A four-wire or three-wire, single phase,  
120/240-volt, 60 Hz, AC-only, electrical supply (or  
120/208-volt electrical supply, if specified on the  
serial/rating plate) is required on a separate 30 amp  
circuit, fused on both sides of the line. Use 10  
gauge solid copper wire. A time-delay fuse or circuit  
breaker is recommended.  
*27¾"  
*26"  
(66cm)  
(70.5cm)  
29"  
29"  
(73.66cm)  
(73.66cm)  
B
A
Exhaust venting: Exhaust your dryer to the  
outside. Four-inch diameter vent is required. Rigid  
or flexible metal exhaust vent must be used. Do not  
use plastic or metal foil vent. Exhaust outlet hood  
must be at least 12 inches from the ground or any  
object that may be in the path of the exhaust.  
22¾"  
(57.8cm)  
43³⁄₈"  
43³⁄₈"  
(110cm)  
(110cm)  
13¾"  
(34.9cm)  
*27¾"  
*27¾"  
(70.5cm)  
(70.5cm)  
29"  
29"  
(73.66cm)  
(73.66cm)  
C
D
A. Small opening side-swing door  
B. Large opening side-swing door  
C. Wide opening side-swing door  
D. Wide opening hamper door  
* Most installations require a  
minimum 5¹⁄₂" (14 cm)  
clearance behind the dryer for  
the exhaust vent with elbow.  
RECESSED AREA AND CLOSET INSTALLATION  
3"  
(7.6 cm)  
14" max.  
(35.6cm)  
48 in. 2  
(310 cm2 )  
18"  
(45.7 cm)  
For closet installation with a  
door, minimum ventilation  
openings in the top and bottom  
of the door are required.  
Louvered doors with equivalent  
air openings are acceptable.  
24 in.2  
3"  
(7.6 cm)  
(155 cm2 )  
0"*  
(0 cm)  
27¾"  
(70.5 cm) (14 cm)  
5½"  
29"  
(73.66 cm)  
0"*  
(0 cm)  
0"*  
(0 cm)  
A. Recessed area  
B
C
B. Side view - closet or confined area  
C. Closet door with vents  
A
EXHAUST VENTING  
*Additional spacing recommended  
Recommended hood styles  
Angled hood style is  
acceptable.  
B
Number of  
90° turns  
or elbows  
Type of  
vent  
Box or  
Louvered  
hoods  
Angled  
hoods  
4"  
(10.2 cm)  
A
0
1
2
3
4
Rigid metal  
64 ft (20 m)  
36 ft (11 m)  
58 ft (17.7 m)  
28 ft (8.5 m)  
Flexible metal  
2.5"  
4"  
(6.4 cm)  
Rigid metal  
Flexible metal  
54 ft (16.5 m)  
31 ft (9.4 m)  
48 ft (14.6 m)  
23 ft (7 m)  
(10.2 cm)  
4"  
(10.2 cm)  
Rigid metal  
Flexible metal  
44 ft (13.4 m) 38 ft (11.6 m)  
27 ft (8.2 m) 19 ft (5.8 m)  
A. Louvered hood style  
B. Box hood style  
Rigid metal  
Flexible metal  
35 ft (10.7 m) 29 ft (8.8 m)  
25 ft (7.6 m)  
17 ft (5.2 m)  
Rigid metal  
Flexible metal  
27 ft (8.2 m)  
23 ft (7 m)  
21 ft (6.4 m)  
15 ft (4.6 m)  
Select the route that will provide the straightest and most direct path  
outdoors. Plan the installation to use the fewest number of elbows and turns.  
Avoid making 90° turns.  
Do not use vent runs longer than specified in vent length chart.  
Determine the number of elbows you will need.  
NOTE: Side and bottom exhaust installations have a 90° turn  
inside the dryer. To determine maximum exhaust length, add one  
90° turn to the chart.  
Because Whirlpool Corporation policy includes a continuous commitment to improve  
our products, we reserve the right to change materials and specifications without notice.  
Dimensions are for planning purposes only. For complete details, see Installation  
Instructions packed with product. Specifications subject to change without notice.  
Ref. 8577187  
08-10-06  
 

Elation Professional Home Theater Server 24 004 1772 User Manual
Extron electronic Stereo Receiver TP R BNC AV User Manual
Fender Stereo Amplifier 410 PRO User Manual
Fujitsu Laptop P5020 User Manual
Fujitsu Personal Computer P301 User Manual
GE Dishwasher Stainless Steel Tub Dishwasher User Manual
GE Fan 106670 User Manual
Gefen Switch GEF DVIKVM 848DL User Manual
Genesis ICE Speaker Genesis 61e User Manual
Genicom Printer 140 TM User Manual