Edimax Technology Security Camera IC 9000 User Manual

 
1. Product Information  
Thank you for purchasing this IC-9000! The IC-9000 is designed  
with the “user-friendly” concept. You can install the IP Camera easily  
on your home network and then access the IP Camera anywhere in  
the world with the video management utility. No need to set  
complicated DNS name or change the router’s configuration. It’s  
just a plug & play.  
Before you start to use the IC-9000, please check the package  
contents. If anything is missing, please contact the dealer of  
purchase and return the package to claim for missing contents.  
2. Check Your Package Contents  
One IC-9000 DDNS-Free Outdoor IP Camera  
One Power Adapter  
One Ethernet Cable  
One Bracket  
One Installation Guide  
One CD ROM (User Guide & Utility)  
One Account Card  
One Accessory Bag (Including Anchors & Screws)  
If any of the above items are missing, please contact your  
supplier.  
3. System Requirement  
CPU: Pentium 4 (or equivalent AMD) 1.0 GHz or above, 1 GB  
RAM  
OS: Windows XP/Vista/Win 7  
Browser: IE 7 or above  
 
4. Interface Information  
Ethernet Indication LED  
Status Indication LED  
Item  
Name  
No.  
Description  
Indicates if the Ethernet link is ok and  
packet traffic is sending/receiving. When the  
Ethernet cable is connected, the LED is  
constant blue light. When there is packet  
sending/receiving, the LED is blinking blue  
light.  
Ethernet  
Indication  
LED (blue)  
1
2
Indicates the Internet connection status.  
When the Internet connection is connected,  
the LED will be constant red light. If there is  
any Internet connection problem, the LED  
will be blinking red light.  
Status  
Indication  
LED (red)  
The focus of the lens is fixed. The effective  
focus range is from 30cm to infinity.  
Totally 36 IR LEDs which can provide  
approximately 30m distance night vision  
The light detector can detect when the light  
3
4
Lens  
IR LEDs  
5
Light Sensor is becoming dark and turn on the IR LEDs  
automatically  
Ethernet  
Jack  
Digital Input  
10/100Mbps fast Ethernet port (Connects to  
your local area network)  
This is for alarm detection, an open circuit is  
6
7
 
Terminal  
Block  
off, a close circuit is on.  
Connects to12V/1.0A power adapter.  
Please make sure you are using the correct  
power adaptor  
8
9
Power Jack  
The button to reset the IP CAM to default  
factory settings. You need to press the reset  
button for more than 4 seconds to enable  
the reset function.  
Reset Button  
 
5. Hardware Installation  
Please follow the following instructions to set up the IC-9000:  
1. Please connect the IP CAM accessories to the body of the  
IC-9000 correctly, including the bracket, power adapter and  
Ethernet cable, as shown in the above figure.  
2. Connect the other end of the Ethernet cable to the home  
network or office network. Usually, this Ethernet cable is plugged  
into a home NAT/router device or an Ethernet switch if in the  
office, as shown in the above figure.  
3. Since the default settings of the IP CAM use DHCP function and  
very often there is a DHCP server on most of the Home/office  
network, the IP CAM should be connected to the Internet  
immediately  
 
6. Software Installation  
1. Before installing CamView software on your PC or laptop, please  
make sure you have correctly installed the IC-9000. It’s highly  
recommended to close other Windows applications to prevent  
the installation from any possbile confliction.  
2. Please insert the installation CD into the CD-ROM drive in your  
notebook or personal computer (must be running Microsoft  
Windows OS)  
3. Execute the program CamView on the disk. The program will  
pop-up some windows about the installation options, please  
press the “Next” button to proceed with the installation.  
4. After the installation is complete, there will be a CamView icon  
on the desktop of your computer screen, please execute this  
icon. The CamView program will run immediately.  
 
7. Start to Use CamView Software  
1. Start the CamView application from either Start -> Programs ->  
CamView or the shortcut on the desktop of the Microsoft  
Windows.  
2. Once the CamView Started, it will search the IC-9000 in your  
Local Area Network automatically and show the CAM ID of each  
of the found IP Cam in the tree menu –“Auto Search” folder of  
the Cam List page.  
Note: To save the found Cam ID on your PC, simply drag it from  
“Auto Search” folder to “CameraList”. By doing so, you can  
easily play the video without memorizing the Cam ID  
3. To View the video, simply double click on the CAM ID which you  
want to see or drag the CAM ID to one of the video play  
windows.  
 
Note: If the Camera you want to see is outside of your LAN and  
the Cam ID is not sored in the “CameraList”, please right-click on  
the “CameraList”, choose “New Camera” and enter the Cam ID  
and password.  
Note: For further operation, please refer to the manual.  
 
R&TTE Compliance Statement  
This equipment complies with all the requirements of DIRECTIVE 1999/5/EC  
OF THE EUROPEAN PARLIAMENT AND THE COUNCIL of March 9, 1999  
on radio equipment and telecommunication terminal Equipment and the  
mutual recognition of their conformity (R&TTE)  
The R&TTE Directive repeals and replaces in the directive 98/13/EEC  
(Telecommunications Terminal Equipment and Satellite Earth Station  
Equipment) As of April 8, 2000.  
Safety  
This equipment is designed with the utmost care for the safety of those who  
install and use it. However, special attention must be paid to the dangers of  
electric shock and static electricity when working with electrical equipment. All  
guidelines of this and of the computer manufacture must therefore be allowed  
at all times to ensure the safe use of the equipment.  
EU Countries Intended for Use  
The ETSI version of this device is intended for home and office use in Austria,  
Belgium, Denmark, Finland, France, Germany, Greece, Ireland, Italy,  
Luxembourg, Bulgaria, Cyprus, Czech Republic, Estonia, Hungary, Latvia,  
Lithuania, Malta, Poland, Romania, Slovakia, Slovenia, the Netherlands,  
Portugal, Spain, Sweden, and the United Kingdom.  
The ETSI version of this device is also authorized for use in EFTA member  
states: Iceland, Liechtenstein, Norway, and Switzerland.  
EU Countries not intended for use  
None  
EuP, 2005/32/EC.  
Article15,5,(a): there shall be no significant negative impact on the  
functionality of the product, from the perspective of the user  
 
 

Electro Voice Microphone MS2500 User Manual
EverFocus Security Camera ED350 User Manual
Fellowes Paper Shredder H 8C H 8Cd User Manual
Ferris Industries Lawn Mower IS1000ZKA2148CE User Manual
Fisher Price Baby Walker L4511 User Manual
Focal Portable Speaker 1000 Be User Manual
Frigidaire Washer 5303937140 User Manual
Geemarc Telephone TP38 User Manual
GE Monogram Refrigerator ZIFI240PII User Manual
Gigabyte Computer Accessories GA 7VAC User Manual