Edelbrock Automobile Accessories 15013 User Manual

TURBOCHARGER TURBINE OUTLET STUD KIT  
For Turbine Outlet to Outlet Elbow  
Catalog #15013  
INSTALLATION INSTRUCTIONS  
Description: Contains the necessary hardware to mount the outlet elbow to the turbine outlet. The hardware is constructed of high-  
quality stainless steel and can be used with any Garrett T25 or T28 Turbocharger.  
KIT CONTENTS:  
Qty.  
Description  
1.75”  
K 5 Stud, 8mm x 1.25 x 1.75” long  
K 5 Nut, 8mm x 1.25  
K 5 Washer, 8mm  
INSTALLATION:  
1. Hand tighten the 1.75” long studs into the turbine outlet,  
with the longer threads towards the turbine outlet  
(See Fig. 1).  
Towards Turbine  
Outlet  
Towards Exhaust  
Elbow  
Fig. 1  
2. When attaching the turbocharger to the exhaust manifold,  
and the turbo outlet elbow to the turbocharger, use an 8mm  
washer under each nut, and hand tighten the 8mm x 1.25  
nuts onto the studs.  
Edelbrock Corporation  
2700 California St. • Torrance • CA • 90503  
3. Torque the 8mm x 1.25 nuts to 190 inch/lbs. (approximately  
Tech Line: 1-800-416-8628  
E-Mail: Edelbrock@Edelbrock.com  
16 ft/lbs).  
Catalog #15013  
©2005 Edelbrock Corporation  
Rev. 5/05 - RS/mc  
Brochure #63-0393  
TURBOCHARGER TURBINE OUTLET STUD KIT  
For Turbine Outlet to Outlet Elbow  
Catalog #15013  
INSTALLATION INSTRUCTIONS  
Description: Contains the necessary hardware to mount the outlet elbow to the turbine outlet. The hardware is constructed of high-  
quality stainless steel and can be used with any Garrett T25 or T28 Turbocharger.  
KIT CONTENTS:  
Qty.  
Description  
1.75”  
K 5 Stud, 8mm x 1.25 x 1.75” long  
K 5 Nut, 8mm x 1.25  
K 5 Washer, 8mm  
INSTALLATION:  
1. Hand tighten the 1.75” long studs into the turbine outlet,  
with the longer threads towards the turbine outlet  
(See Fig. 1).  
Towards Turbine  
Outlet  
Towards Exhaust  
Elbow  
Fig. 1  
2. When attaching the turbocharger to the exhaust manifold,  
and the turbo outlet elbow to the turbocharger, use an 8mm  
washer under each nut, and hand tighten the 8mm x 1.25  
nuts onto the studs.  
3. Torque the 8mm x 1.25 nuts to 190 inch/lbs. (approximately  
16 ft/lbs).  
Edelbrock Corporation  
2700 California St. • Torrance • CA • 90503  
Tech Line: 1-800-416-8628  
E-Mail: Edelbrock@Edelbrock.com  
Catalog #15013  
Rev. 5/05 - RS/mc  
©2005 Edelbrock Corporation  
Brochure #63-0393  
 

Extron electronic Stereo Receiver DVS 204 Series User Manual
Fellowes Chipper T580C User Manual
FireplaceXtrordinair Indoor Fireplace 98500507 User Manual
FOCUS Enhancements Digital Camera FS 4 HD1 User Manual
Frigidaire Freezer 297298800 User Manual
Fundex Games Board Games Phase 10 Dice User Manual
Fusion Light Therapy Device F300S User Manual
Gefen TV Receiver GTV WHD 1080P SR User Manual
GE Water Dispenser 960 Series User Manual
Go Video DVD VCR Combo VR4940 User Manual