Fisher Paykel Oven BI601 User Manual

IMPORTANT!  
PLEASE MAKE THIS INFORMATION AVAILABLE TO YOUR JOINER AS IT  
COULD REDUCE YOUR INSTALLATION COST.  
Fisher & Paykel  
INSTALLATION INFORMATION  
Built-In Ovens  
BI601 Series - Built-In Oven  
BI601D Series - Built-In Double Oven  
BI601XC2 Series - Built-In Oven/Microwave Combination  
BI451 Series - Built-In Compact Oven  
CAUTION: In order to avoid a hazard these appliances must be installed  
according to these Installation Instructions.  
Please follow installation information carefully.  
If in doubt consult your local building authority by-laws.  
BEFORE YOU START  
DO  
Ensure a suitable disconnection switch is incorporated in the permanent wiring,  
mounted and positioned to comply with the local wiring Rules and Regulations.  
DO  
Ensure that the location of the Oven connection socket is outside the installation  
space if the appliance is flush to the rear wall.  
DO  
DO  
Ensure the benchtop and the Oven cavity are square and level.  
Ensure the electrician allows as least 1.5m free length of connection cable within the  
cavity for ease of installation and service of the Oven.  
DO  
DO  
Use easy to clean finishes for the wall surfaces surrounding the Oven and Cooktop to  
aid removal of any cooking fume staining resulting from use of the Oven and  
Cooktop.  
Ensure that the interconnection cord between the Cooktop and the Oven is not  
accessible via cupboard doors after installation. This applies to any extension cords as  
well, even though they are double insulated.  
DO  
DO  
DO  
Consult local building authorities and by-laws if in doubt regarding installation.  
Check the height from the floor suits the user.  
Ensure the cavity is a completely sealed box with no gaps. This will ensure the  
cooling air flows under the product to give the correct venting and cooling for the  
oven and cabinet surround.  
Page 1  
 
Height Recommendation Guide  
Figures are based on an average height of 1650mm (5'5") wearing shoes.  
The height of the product may vary + 50mm according to the height of the most frequent  
user.  
Page 3  
 
BI601 Series - Built-In Oven  
Overall  
Overall  
Width  
595mm  
568mm  
Height  
595mm  
585mm  
Depth  
562mm  
550mm  
Oven Dimensions  
Cabinet Dimensions  
Please Note: Oven front dimensions differ from cabinet dimensions.  
Product Dimensions  
Top View  
Side View  
Page 4  
 
BI601D Series - Built-In Double Oven  
Overall  
Overall  
Width  
595mm  
568mm  
Height  
932mm  
922mm  
Depth  
562mm  
550mm  
Oven Dimensions  
Cabinet Dimensions  
Please Note: Oven front dimensions differ from cabinet dimensions.  
Product Dimensions  
Top View  
Side View  
Page 5  
 
BI601XC2 Series - Built-In Oven/Microwave Combination  
Overall  
Overall  
Width  
595mm  
568mm  
Height  
932mm  
935mm  
Depth  
562mm  
550mm  
Oven Dimensions  
Cabinet Dimensions  
Please Note: Oven front dimensions differ from cabinet dimensions.  
Product Dimensions  
Top View  
Cabinet Detail View  
Side View  
Page 6  
 
BI601XC Series - Built-In Oven/Microwave Combination  
Overall  
Overall  
Width  
595mm  
568mm  
Height  
932mm  
935mm  
Depth  
562mm  
550mm  
Oven Dimensions  
Cabinet Dimensions  
Please Note: Oven front dimensions differ from cabinet dimensions.  
Product Dimensions  
Top View  
Cabinet Detail View  
Side View  
Page 6  
 
BI451 Series - Built-In Compact Oven  
Overall  
Overall  
Width  
595mm  
568mm  
Height  
450mm  
440mm  
Depth  
562mm  
550mm  
Oven Dimensions  
Cabinet Dimensions  
Please Note: Oven front dimensions differ from cabinet dimensions.  
Product Dimensions  
Top View  
Side View  
Page 7  
 
Part No. 540784C August 2001  
 
INSTALLATION INSTRUCTIONS FOR  
CT560X, CT560C, CT5602F, CT2802, CT6552S,  
& BICT600 SERIES COOKTOPS  
IMPORTANT!  
PLEASE MAKE THIS INFORMATION AVAILABLE TO YOUR JOINER AS IT  
COULD REDUCE YOUR INSTALLATION COST.  
CAUTION: In order to avoid a hazard these appliances must be installed  
according to these Installation Instructions.  
BEFORE YOU START  
DO Ensure a suitable disconnection switch is incorporated in the permanent wiring,  
mounted and positioned to comply with the Local Wiring Rules and Regulations.  
DO Ensure the bench is square and level.  
DO Use easy to clean finishes for the wall surfaces surrounding the Cooktop to aid  
removal of any cooking fume staining resulting from use of the Cooktop.  
DO Consult local building authorities and by-laws if in doubt regarding installation.  
DO Ensure that the interconnection cord between the Cooktop and the Oven or control  
Box is not accessible via cupboard doors after installation. This applies to any  
extension cord as well, even though they are double insulated.  
Note:  
Ensure that there is a minimum of 60mm between the cutout and the rear  
or side wall.  
If the cutout is less than 100mm from the wall, some form of protection against heat  
should be used, such as ceramic tiles.  
If prolonged use is anticipated, or the cooktop is mounted above a drawer  
space, a barrier between is recommended.  
The CT560X should not be installed directly above a dishwasher as the humidity  
may damage the electronics.  
 
Cooktop Cutout Dimensions  
MINIMUM DEPTHS  
CT560X  
CT560C  
CT5602F  
CT2802  
CT6552S  
BICT600  
60mm  
60mm  
60mm  
60mm  
65mm  
50mm  
COOKTOP DIMENSIONS  
LENGTH WIDTH DEPTH  
578mm 511mm 51mm  
578mm 511mm 51mm  
578mm 511mm 51mm  
289mm 511mm 55mm  
CLAMPING DOWN COOKTOP  
Place the cooktop into the cutout  
and tighten with the supplied clamps.  
TYPE  
CT560X  
CT560C  
CT5602F  
CT2802  
CT6552S  
These will cope with bench thickness  
15-50mm.  
(Cooktop)  
(Controls)  
BICT600  
578mm 511mm 45mm  
88mm 511mm 63mm  
578mm 511mm 45mm  
20mm  
min.  
50mm  
CT6552S Control Box Installation  
·
·
·
·
·
·
·
·
·
·
Remove the brackets from the cooktop and the box.  
Place the cooktop in the cutout.  
Feed the cooktop wiring harness up through the box cutout.  
Remove Control Box cover.  
Connect the cooktop wiring harness.  
Clamp the wiring harness.  
Wire the mains to the box and clamp.  
Replace Control box cover.  
Roll the box into the cutout.  
Secure control box and cooktop using brackets provided.  
Note:  
Two small brackets are provided that screw to the sides of the control box. These  
must be used to clamp the control box down to the joinery. Three brackets are  
provided for clamping down the cooktop.  
Part No. 599049B September 2000  
 

Craftsman Drill 31527994 User Manual
Craftsman Lawn Mower 38902 User Manual
Curtis TV DVD Combo LCDVD191 User Manual
Danby Refrigerator DCR122BLDD User Manual
Danby Washer DWM5500W User Manual
Frigidaire Oven 318205302 User Manual
Furman Sound Network Card PB 48 User Manual
Gaggia Espresso Maker 740903008 User Manual
Gateway Laptop 400SD4 User Manual
GE Monogram Switch ZBD3500ZZWW User Manual