Euro Pro Carpet Cleaner S3306H User Manual

Hard Surface Steam Cleaner  
OWNER’S MANUAL  
Model: S3306H  
120V., 60Hz, 1500 Watts  
EURO-PRO Operating LLC  
U.S.: 94 Main Mill Street, Door 16  
Plattsburgh, NY 12901  
Canada: 4400 Bois-Franc  
St-Laurent, QC H4S 1A7  
Tel. : 1 (800) 798-7398  
Copyright © Euro-Pro Operating LLC 2006  
 
TIPS ON HOW TO USE YOUR SYSTEM  
IMPORTANT SAFETY INSTRUCTIONS  
When using your Steam Cleaner, basic safety precautions should always be  
observed, including the following:  
ALWAYS FINISH CLEANING BY WIPING DOWN THE CLEANED SURFACE  
WITH A TOWEL  
1. Read all instructions before using your  
steam cleaner.  
To reduce the risk of fire, electric shock, or  
injury:  
2. Use the system only for its intended use.  
3. To protect against a risk of electric shock,  
do not immerse any part of the system in  
water or other liquids.  
4. Never yank cord to disconnect from  
outlet; instead, grasp plug and pull to  
disconnect.  
Do not leave the steam cleaner plugged  
in when unattended. Unplug the electrical  
cord when not in use and before servicing or  
refilling water tank.  
Do not allow to be used as a toy. Close  
attention is necessary when used by or near  
children, pets or plants.  
Use only as described in this manual. Use  
only manufacturer’s recommended  
accessories.  
Do not pull cord, use cord as a handle,  
close a door on cord, or pull cord around  
sharp edges or corners. Keep cord away  
from heated surfaces.  
Do not use extension cords or outlets with  
inadequate current carrying capacity.  
Do turn off all controls as applicable before  
unplugging from electrical outlet.  
Do not unplug by pulling on cord. To  
unplug, grasp the plug, not the cord.  
Do not handle plug or steam cleaner with  
wet hands or operate without shoes.  
Do not put any objects into openings. Do  
not use with any opening blocked.  
ALWAYS STORE YOUR APPLIANCE  
INDOORS in a cool, dry area.  
Refrigerator - Use the concentrator to  
blow away dirt in the ice machine and  
on door seals. The vapor will not dry  
out or crack the seals as chemicals  
often do. Can openers and other  
kitchen equipment can be easily  
cleaned with the bristle brush to get into  
all the nooks and crannies. Mold stains  
around door gaskets can be removed  
with the bristle brush.  
To clean microwaves or other small  
appliances use the nylon bristle brush  
for small areas.  
Note: When cleaning small electrical  
appliances always unplug them from  
outlet before cleaning. Do not direct  
steam into any openings of the  
appliances.  
Hints  
The steam cleaner has many uses that  
have not been mentioned. This was  
meant only to give you a general idea of  
what can be achieved with the unit.  
However, the ways in which to use the  
attachments and brushes are in most  
cases universal. It is most helpful to  
always have a terry cloth towel or paper  
towel ready to use for removal of  
moisture and residue. 100% white  
cotton towels work best.  
You can clean the brushes with your  
steam cleaner. When cleaning the  
bristle brushes, use a pair of pliers to  
hold and blow dirt as above or place in  
the basket of your dishwasher.  
5. Do not allow cord to touch hot surfaces.  
Let the system cool completely before  
putting away or opening water tank  
(removing the safety cap). Wrap cord  
loosely around system when storing.  
6. Always disconnect system from electrical  
outlet when filling with water or emptying  
and when not in use. Always turn the  
safety cap slowly when opening the water  
tank. This will allow any remaining steam  
to escape gradually.  
7. Do not operate the system with a damaged  
cord or plug, or if the appliance or any other  
part of the system has been dropped or  
damaged. To avoid the risk of electric  
shock, do not disassemble or attempt to  
repair the steam cleaner. Return the  
system to EURO-PRO Operating LLC (see  
warranty) for examination and repair.  
Incorrect re-assembly or repair can cause a  
risk of electrical shock or injury to persons  
when the steam cleaner is used.  
8. Close supervision is necessary for any  
appliance being used by or near children.  
Do not leave the system unattended while  
connected to electrical outlet or when hot.  
9. Burns can occur from touching hot metal  
parts, hot water or steam. Use caution  
when draining unit after use as there may  
be hot water in the unit. Never direct steam  
at any person. The steam is very hot and  
can cause burns.  
10. Do not operate in the presence of  
explosive and/or flammable fumes.  
11. This appliance is intended only for  
household use. Follow all user instructions  
in this manual.  
Note: Wipe with a towel immediately  
before the cleaned area dries. When  
cleaning the oven, use the bristle brush  
to clean around the elements and drip  
trays. Use the bristle brush for cracks,  
crevices, and hard to reach areas.  
To clean counter tops, use the bristle  
brush first in order to loosen the debris,  
then wipe with a terry cloth towel to  
finish.  
Do keep your work area well lit.  
Do Not turn the appliance over or on its  
side. Never direct steam towards people,  
animals or plants.  
Do not immerse the steam cleaner into  
water or other liquids. Always unplug the  
power cord from the electrical socket when  
filling the steam cleaner.  
Do NOT add cleaning solutions, scented  
perfumes, oils or any other chemicals to  
the water used in this appliance as this  
may damage the unit or make it unsafe  
for use. Use tap water or distilled/purified  
water if the tap water in your area is very  
hard.  
ORDERING SUPPLIES  
If you need to order supplies such as steam pocket towels, etc. please call  
the customer service number at 1 (800) 798-7398.  
12. Never use any chemicals or substance  
other than tap water in the machine. Use of  
chemicals may damage the machine. Use  
of chemicals will automatically void your  
warranty.  
SAVE THESE INSTRUCTIONS  
For Household Use Only  
12  
1
Rev. 04/06  
 
TIPS ON HOW TO USE YOUR SYSTEM  
ADDITIONAL IMPORTANT SAFEGUARDS  
Fiberglass or Stainless Steel Surfaces  
Blinds  
1. To avoid circuit overload, do not operate another appliance on the same socket  
(circuit) as the steam cleaner.  
2. If an extension cord is absolutely necessary, an extension cord rated a minimum  
of 15 ampere, 14 gage cord should be used. Cords rated for less amperage may  
overheat. Care should be taken to arrange cord so that it cannot be pulled or  
tripped over.  
Use the bristle brush. Slowly move the  
brush over the surface to be cleaned.  
The vapor will emulsify the dirt and  
grease on the surface. Follow behind  
with a terry cloth towel over the brush to  
remove excess moisture and residue.  
Tip: An old idea for polishing stainless  
steel is to wipe it down with seltzer soda  
water after it is cleaned.  
Use the nylon bristle brush to clean  
blinds. Move the brush over the  
surface, allowing enough time for the  
vapor to penetrate. Work quickly on  
PVC blinds. Test for color fastness on  
fabric blinds before using. Finish by  
wiping with a towel.  
3. Do not leave unattended when the system is connected to a power  
supply/electrical outlet.  
Automotive  
For detailing the wheels, use the  
concentrator and the bristle brush.  
Exterior windows are cleaned best by  
applying the vapor with the concentrator  
and following with a paper towel.  
To clean bicycles, use the bristle brush.  
To clean equipment, use the bristle  
brush, depending on the surface area.  
Finish by wiping down with a towel.  
WARNING: This appliance is equipped with a grounded,  
type 3-wire cord (3-prong plug). This plug will only fit into an  
electrical outlet made for a 3-prong plug. This is a safety  
feature. If the plug should fail to fit the outlet, contact an  
electrician to replace the outlet. Do not attempt to defeat the  
safety purpose of the grounding pin, part of the 3-prong plug.  
Bathroom Areas  
To clean the bathtub or shower area, use  
the bristle brush for grout, shower door  
tracks, hard to get areas and heavily  
soiled areas. The dual edge window/tile  
squeegee will be the most efficient way  
to clean the rest of the area. Allow plenty  
of time for the heat to penetrate the  
surface. This is especially helpful in the  
shower area if there is tile or grout. Wipe  
with towel.  
Removal of soap scum on tile, grout, and  
shower doors is also easier with the  
steam cleaner.  
To clean sanitary fixtures, use the  
concentrator with or without bristle brush.  
Use a terry cloth towel or paper towel to  
wipe up excess moisture and residue.  
To clean the sink and faucets, use bristle  
brush then finish by wiping with a towel.  
Artificial Plants  
Use the concentrator without a brush  
attached to blow off the dust and dirt.  
CAUTION: Always drain condensed water from hose  
before use or if unit has been left idle for a period of time. To  
drain hose, direct nozzle into an appropriate container or sink  
and depress hand grip steam trigger. Once hose has been  
drained, normal use may be resumed. Never direct nozzle  
towards people, animals or plants.  
Nicotine and Tar  
Nicotine and tar dissolves at high  
temperatures and becomes a light  
yellow oil that has the consistency of  
sewing machine oil. When the  
nicotine/tar film is touched by steam  
pocket, it immediately dissolves and  
flows into the steam pocket towel. You  
can remove it from flat surfaces as fast  
as you can move the steam pocket over  
the surface.  
WARNING: Your Steam Cleaner is designed to clean hard surfaces  
and upholstery that will withstand high heat. Do not use on soft plastics  
and cold glass. On surfaces that have been treated with wax or some no  
wax floors, the sheen may be removed by the heat and steam action. Do  
not use on unsealed wood. This could cause the wood grain to rise. It is  
therefore recommended to test an isolated area of the surface to be  
cleaned before proceeding.  
Soap Scum  
Soap scum dissolves almost immediately  
under a combination of heat and  
moisture. Rinse the surface with a small  
amount of water afterwards or go back  
over it once more with a clean terry cloth  
towel.  
Note: Soap scum sometimes will  
develop a hard surface from waterborne  
minerals. If this is the case, use the  
bristle brush to break up this surface - or  
spray or wipe first with lemon, vinegar or  
seltzer soda water to soften the minerals.  
Moving too slowly can dry out the soap  
scum and cause it to granulate on the  
surface. The surface will have a gritty  
feel. If this happens, apply vapor to the  
surface with the bristle brush again and  
re-clean.  
Removing Wax, Tar, Etc.  
Many stains are only stuck on the  
surface of materials and can be easily  
and quickly removed by “blowing”  
excess material away from the surface  
from the side. This is accomplished by  
using the concentrator. Hold the terry  
cloth towel to the side to catch the loose  
residue as it is blown by the  
IMPORTANT: Do NOT add cleaning solutions, scented perfumes, oils or  
any other chemicals to the water used in this appliance. Use regular water or  
distilled/purified water if the tap water in your area is very hard.  
WARNING: Danger of Scalding. Please use caution when using  
concentrator.  
the steam cleaner. The steam emitted from the openings is very hot.  
Note: Always vacuum any loose  
residue off the surface before you apply  
vapor to it.  
SAVE THESE INSTRUCTIONS  
Garden Furniture  
FOR HOUSEHOLD USE ONLY  
Use any of the brushes depending on the  
surface area. Work quickly when  
cleaning resin outdoor furniture. Finish by  
wiping with a towel.  
2
11  
 
TIPS ON HOW TO USE YOUR SYSTEM  
GETTING TO KNOW YOUR STEAM CLEANER  
Wood, Vinyl and Marble Floors  
Spot Cleaning (Carpets)  
Use the Steam Pocket ™ to clean wood,  
vinyl and marble floors. Move the  
Steam Pocket™ across the floor as if  
you are mopping. When one side of the  
towel is soiled, turn the Steam Pocket™  
frame and use the other side. One of  
the great advantages of using our  
Steam Pocket™ is that your floor will dry  
faster than if you used a mop or other  
floor cleaning device. It is normal that  
some moisture may be left behind  
depending on how quickly you move the  
Steam Pocket™ across the floor and the  
relative heat and humidity of the room.  
Be sure to move quickly and steadily  
over wood, linoleum and vinyl flooring to  
avoid damaging the surface and  
Use the concentrator with or without the  
bristle brush. Move slowly over the soiled  
area, allowing the steam to penetrate.  
Agitate with bristle brush or clean towel.  
Dab the spot with the towel (do not rub).  
Repeat as necessary to remove stain.  
Vacuum only after the carpet has  
completely dried.  
Always test color fastness of carpet in an  
inconspicuous area before cleaning.  
If your steam cleaner fails to remove  
stubborn stains a commercially available  
carpet shampoo may be required. Do  
NOT add cleaning solutions, scented  
perfumes, oils or any other chemicals to  
the water used in this appliance as this  
may damage the unit or make it unsafe  
for use.  
removing wax.  
To Clean Waxed Floors: Use the  
Steam Pocket™ with quick strokes.  
This will cause the dirt to be removed  
but not the wax.  
Vinyl Floors: Do not allow heat to build  
up in any kind of vinyl since it can soften  
it enough to affect its texture. Work fast  
on vinyl.  
Tile Floors: Use the concentrator with  
the bristle brush. Have the Steam  
Pocket™ ready as well. Clean the grout  
between the tiles with the bristle brush.  
Remove the concentrator and bristle  
brush and attach the hose and Steam  
Pocket™. Move the Steam Pocket™  
across the floor to clean the tile and  
remove excess moisture and residue.  
Caution: Always determine the color-  
fastness of any fabric-especially with  
reds or blues - by taking a clean, moist,  
warm towel and gently rubbing a small  
area as far down on the back or other out  
of the way place on the furniture as  
possible. If color comes off on the towel,  
you may need to have the piece dry  
cleaned.  
Window, Glass Surfaces and Mirrors  
Use the window squeegee. Work with  
the vapor jet on using the top to bottom  
movements. Use the squeegee with the  
vapor off to clear the water from the  
glass. To do this without leaving streaks,  
use lateral movements from the top to  
the bottom of the surface.  
1. Main Unit  
2. Handle  
3. Safety Cap  
4. Steam Ready Light  
5. On/Off Power Switch  
6. Hand Grip  
7. Steam Trigger Lock  
8. Steam Trigger  
9. Flexible Hose  
10. Extension Tubes (x2)  
11. Extended Concentrator  
12. Nylon Bristle Brush (x2)  
13. Window Squeegee  
14. Steam Pocket Angle Adapter  
15. Steam Pocket Frame  
16. Steam Pocket Towel  
17 Funnel  
Caution: When cleaning windows,  
always avoid any sudden changes in  
temperature to prevent glass breakage or  
cracks.  
18. Measuring Cup  
19. Shoulder Strap  
Technical Specifications  
Voltage:  
Power:  
120V., 60Hz.  
1500 Watts  
Water Capacity:  
16 US fl. oz. (500 ml.)  
* Illustrations may differ from actual product.  
10  
3
 
FEATURES OF STEAM CLEANER  
TIPS ON HOW TO USE YOUR SYSTEM  
Water  
Care and Maintenance  
If you consistently use distilled water,  
cleaning the tank is unnecessary.  
1.Multipurpose Steam Cleaner:  
3. Heavy-duty crush-resistant  
hose.  
Use tap water for all your cleaning  
Bathrooms, kitchens, living areas,  
pet areas and appliances.  
needs.  
However, if you live in an area with  
hard water, use distilled water  
when steaming light colored  
fabrics to eliminate the possibility  
of hard water stains.  
Automotive, patio and windows.  
Rinsing Out the Steam Cleaner  
Normally, a periodic rinse of your steam  
cleaner will free it from deposits. This is  
recommended every 10-15 tankfulls, to  
free up any scale deposits from the tank.  
Fill the boiler with 8 oz. (125 ml) of water  
and shake the cleaner vigorously. Tilt  
the cleaner upside down to empty the  
boiler of water and any scale deposits.  
2. Lightweight & Portable  
Important: Do NOT add cleaning  
solutions, scented perfumes, oils or any  
other chemicals to the water used in  
this appliance. Use tap water or  
distilled water if the tap water in your  
area is very hard.  
Descaling Your Steam Cleaner  
If the tap water in you area contains a  
high level of calcium deposits and you  
have been using tap water to do your  
steam cleaning, you should descale your  
unit after 10-15 tankfulls.  
4. Versatile, quick-change  
accessories  
Efficient Work  
For vertical surfaces, wipe with a  
towel from the top down, in this  
way the dirty water will not soil  
surfaces already cleaned.  
Avoid changing brushes back and  
forth while cleaning.  
Start with the smallest brush to  
clean tight spots and corners first.  
Use a towel to wipe dirt as soon as  
possible, otherwise it will dry and  
re-adhere to the surface.  
To Descale the Steam Cleaner  
1. Unplug the steam cleaner from the  
power source before you descale the  
boiler. Allow the unit to cool.  
2. Fill the boiler with 1 part vinegar and  
5 parts water and leave overnight or  
for a period of approximately 8 hours.  
Do not screw the safety cap onto the  
steam cleaner while you are  
descaling the boiler. Do not use the  
steam cleaner while descaling  
solution is inside the boiler.  
3. After the period of soaking, turn the  
steam cleaner upside down to empty  
solution from the boiler. Due to the  
fact that a small amount of solution  
will be left in the boiler, it is necessary  
to rinse the boiler out with clean water  
2 or 3 times. Your steam cleaner is  
now ready for use.  
9
4
 
OPERATING INSTRUCTIONS  
OPERATING INSTRUCTIONS  
Components  
Attaching the Shoulder Strap  
On/Off Power Switch: The On/Off  
switch has a light that will illuminate  
when the unit is plugged into the 120V  
wall outlet and the switch turned to the  
“On” position.  
Steam Ready Light: The steam ready  
light located on the handle will turn “On”  
when the steam is ready.  
Caution: Read the instructions for  
“Filling the Water Tank” before opening  
the Safety Cap.  
Caution: Always unplug before filling.  
ALLOW UNIT TO COOL FOR  
FIFTEEN (15) MINUTES BEFORE  
REFILLING.  
Using the detachable shoulder strap  
allows for greater freedom of movement  
when both hands are needed for  
various cleaning tasks. To attach the  
shoulder strap to the steam cleaner,  
simply snap the shoulder strap hooks  
onto the connecting rings on the unit  
body. (Fig. 9, 10 & 11)  
Fig. 1  
Warning: Extreme care should be  
taken when refilling the unit. Allow  
unit to cool for 15 minutes and vent  
any residual steam pressure (see  
Step #2) from the boiler before  
refilling. When refilling the steam  
cleaner while the boiler is still hot,  
there is a risk that water will squirt  
back during filling and cause  
scalding. Use caution when opening  
the Safety Cap as cap may become  
hot during use and escaping steam  
can cause scalding.  
Connecting  
points  
Connecting  
points  
Important: Do NOT add cleaning  
solutions, scented perfumes, oils or any  
other chemicals to the boiler in this  
appliance. Use tap water or distilled  
water if the tap water in your area is  
very hard.  
Fig. 11  
Fig. 9  
Filling or Refilling Your Steam  
Cleaner With Water  
Important: Always insure that the unit  
is “UNPLUGGED” from the wall  
receptacle prior to initial filling or re-filling  
the water tank and has been allowed to  
cool for 15 minutes. Never attempt to fill  
this unit under a water tap, always use  
the filling funnel provided.  
1. Remove the plug from the electrical  
outlet and allow the steam cleaner to  
cool for fifteen (15) minutes.  
2. Press the steam trigger on the hand grip  
to vent any residual steam pressure that  
is in the boiler.  
3. Place the unit on a flat, stable surface.  
Push down firmly on the safety cap  
and slowly turn the safety cap counter  
clockwise until it is removed.  
4. Place the funnel in the tank opening.  
(Fig. 1) Fill with a maximum of one  
filling flask or 2 cups (500 ml) of water.  
Do Not Overfill. Turn the safety cap  
clockwise to replace.  
Note: To remove or replace the safety cap,  
push down on it firmly and rotate it  
clockwise to tighten or counter clock-wise to  
loosen. If not depressed the cap will rotate  
freely without advancing.  
Important: When using the steam  
cleaner with the shoulder strap,  
avoid rocking or tilting the unit  
excessively as this may cause water  
to enter the hose and be discharged  
along with the steam.  
5. Connect desired attachments onto  
the flexible steam hose.  
6. Plug the unit into a standard (120  
volt, grounded) wall receptacle and  
switch the On/Off switch to the “On”  
position. Allow approximately 4-6  
minutes for vapor to reach its  
working temperature and pressure.  
When the unit is ready for use, the  
steam ready light will turn “On”.  
Always point nozzle outlet in a safe  
direction. At the start, some water  
will come out from the nozzle.  
This is normal.  
Note: When the steam cleaner has run  
out of water, steam output will cease.  
7. When finished using the unit, turn it  
“Off” and unplug it from the electrical  
outlet.  
Fig. 10  
Warning: This appliance is under  
pressure. After every use, press  
steam trigger button until all  
pressure has been released before  
removing safety cap. Allow unit to cool  
for fifteen (15) minutes before refilling.  
Note: Filling the unit with hot water will  
shorten the heat up time.  
8
5
 
OPERATING INSTRUCTIONS  
OPERATING INSTRUCTIONS  
Caution: Be aware of hand placement  
Care & Maintenance of the Steam  
Pocket Towel  
Due to the unique cleaning ability of this  
cloth, proper care of your micro-fiber towel  
is required to ensure long life and  
continued cleaning ability.  
• The first thing you should do when  
you get a new micro-fiber towel is to  
wash and dry it. During the  
manufacturing process the fabric has a  
tendency to become flat as it picks up  
contaminants from the air and  
machinery. There will also be a number  
of loose threads that, while they cause  
no harm, can be annoying the first time  
you use the towel.  
• To clean the towel, simply wash it in your  
washing machine using the warm water  
setting.  
• Always wash your towels separately  
from other fabrics. They have a tendency  
to pick up lint and other particles from  
other fabrics and the next time you use  
your towel, this lint will transfer to the  
surface being cleaned.  
ONLY USE LIQUID DETERGENTS,  
never use dry detergents as many times  
the granules do not fully dissolve and  
become trapped in the towel. This can  
scratch the surface that you are  
cleaning.  
NEVER USE BLEACH OR FABRIC  
SOFTENERS! Bleach will damage the  
micro-fiber fabric and fabric softeners  
deposit a coating on the micro-fiber  
fabric what will not allow the cloth to  
clean efficiently.  
• Air dry the towel. Do not put in a clothes  
dryer as high heat will cause the towel to  
shrink and the micro-fibers to break  
down.  
• If you wash your towel on a regular basis  
and don’t let them get too dirty, they will  
last much longer. As with any fabric, dirt  
particles, grease and other contaminants  
can cause the fibers to break down,  
therefore regular cleaning will help  
preserve your micro-fiber towels.  
• As you use the micro-fiber towel, you will  
notice that sometimes a thread will  
loosen or pull out. This is normal and  
you should NEVER PULL AT THE  
LOOSE THREAD! Pulling the thread can  
cause the weave to come undone.  
Instead, simply trim the thread with a  
pair of sharp scissors.  
Using the Trigger Lock  
Note: Fit the steam pocket frame with the  
angle adapter onto the extension tube.  
Step 2. If the angle adapter is not  
attached to the steam pocket  
frame, attach as follows: Hold  
the steam pocket frame in one  
hand and the  
and take care not to actuate the steam  
discharge switch while installing or  
removing accessories.  
The steam cleaner has a steam trigger  
lock that automatically engages when  
you depress the steam trigger. (Fig. 2)  
To unlock the steam trigger, just press it  
in the direction of the hose.  
Attaching the Accessories to the  
Flexible Steam Hose  
Allow the unit to cool for 5 minutes  
before changing accessories.  
Steam  
Trigger Lock  
angle adapter in  
the other. Insert  
the angle adapter  
into the opening  
Window Squeegee  
This attachment is very useful for  
cleaning large windows, plastic  
material, ceramic, tiled or marble  
surfaces.  
Fig. 2  
of the steam  
pocket frame as  
Fig. 5  
Using Your Steam Cleaner with  
Steam Pocket  
shown in Fig. 5. Note that the  
flat side on the nozzle must face  
toward the side of the frame with  
the brass pin. Once inserted,  
rotate it 90°.  
Important: When cleaning windows,  
always avoid any sudden changes in  
temperature to prevent glass  
breakage or cracks.  
Step 1. Connect the steam pocket  
accessory to the steam handle  
with two extension tubes. To  
attach the extension tubes one  
onto the other or onto the hand  
grip, press the locking button  
ensuring that it fits into the hole  
(Fig. 3., Fig. 4) and press the two  
sections together. To disconnect,  
repeat the operation by pressing  
the locking button and pulling the  
two sections apart.  
Step 3. Insert the electrical power cord  
into the outlet. Heating time is  
approximately 4-6 minutes with  
cold water. Filling the steam  
generator with hot water will  
shorten the heat up time.  
To use: Connect the window  
squeegee to the hand  
grip or use with  
extension tube for  
hard to reach surfaces.  
Apply steam abundantly, then remove  
excess water and dirt with the glass  
wiping edge.  
Extended Concentrator  
Use the extended concentrator  
to clean under toilet rims  
and hard to reach places.  
To use: Attach the extended  
concentrator to the handgrip or to  
the extension tubes.  
Attaching the Steam Pocket  
Towel to the Frame  
Warning: Always insure the unit is  
UNPLUGGED” from the wall receptacle  
prior to attaching or removing accessories.  
Locking Button  
1. Slide the steam  
pocket towel over  
the steam pocket  
frame. (Fig. 6)  
Hand Grip Fig. 3  
2. Bring the towel all  
Nylon Bristle Brush (x2)  
It is best for cleaning grout in-between  
the tiles, ceramic and marble.  
To use: Screw on the nylon  
bristle brush on to the end  
of the extended  
Fig. 6  
the way to the top  
of the steam  
pocket frame.  
(Fig. 7)  
3. Bring the hook and  
latch strips that are  
on the back side of  
concentrator, which  
Fig. 4  
then may be used directly  
on the hand grip or with extension  
tubes.  
Fig. 7  
the steam pocket  
towel over the  
steam pocket frame  
and attach to  
the inside of the  
front side of the  
steam pocket towel.  
Fig. 8  
(Fig. 8)  
Note: If replacing the steam pocket  
towel, make sure that the steam pocket  
frame has been allowed to cool before  
removing or attaching a new steam  
pocket towel.  
6
7
 

Continental Electric Fan KU33515 User Manual
Craftsman Lawn Mower 24728919 User Manual
Craftsman Saw 113298721 113298761 User Manual
Cuisinart Coffeemaker DTC975BKN User Manual
Dacor Cooktop RNCT365 User Manual
Dukane Projector 8055 User Manual
Duracraft Humidifier DH 831 User Manual
Dynex TV Mount DX DTVMFP23 User Manual
Extron electronic TV Cables 26 613 XX User Manual
Fisher Paykel Ventilation Hood 88833 EC120DXV2 User Manual